Log in
LEED v2009
Core & Shell
Materials and Resources
Recycled Content

LEED CREDIT

CS-2009 MRc4: Recycled Content 1-2 points

See all forum discussions about this credit »

Credit achievement rate

XX%

Upgrade to LEEDuser Premium to see how many projects achieved this credit. Try it free »

LEEDuser expert

Jon Clifford

GREENSQUARE
LEED-AP BD+C

LEEDuser’s viewpoint

Frank advice from LEED experts

LEED is changing all the time, and every project is unique. Even seasoned professionals can miss a critical detail and lose a credit or even a prerequisite at the last minute. Our expert advice guides our LEEDuser Premium members and saves you valuable time.

Credit language

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Use materials with recycled content1 such that the sum of postconsumer2 recycled content plus 1/2 of the preconsumer3 content constitutes at least 10% or 20%, based on cost, of the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows:

See all forum discussions about this credit »

What does it cost?

Cost estimates for this credit

On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.

Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.

This information is also available in a full PDF download in The Cost of LEED v4 report.

Learn more about The Cost of LEED v4 »

Frequently asked questions

I have recycled content information for a product, but it doesn’t specify whether it is pre-consumer or post-consumer. What should I do?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

The recycled content percentage on the product data sheet is given as a range. What should I do?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

The manufacturer can't give me product-specific recycled content data, but they say that they fall within the national industry average. Can I use that?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Is the default average recycled content value of 25% for steel still allowed?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Can site materials, such as soil, be included in the MR credit calculations?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Are there recycled content claims that I should be wary of?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Can I count FSC-certified MDF toward both MRc4 and MRc7?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

If I have one cut sheet that meets the LEED 2009 requirement to upload 20% of cut sheets by cost, for this credit, is that acceptable?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

See all forum discussions about this credit »

Addenda

4/8/2016Updated: 5/4/2016
Form Update
Description of change:
added ID+C example tab and additional instructions.
Campus Applicable
No
Internationally Applicable:
No
1/15/2016Updated: 4/7/2016
Form Update
Campus Applicable
No
Internationally Applicable:
No
5/9/2011Updated: 2/14/2015
Reference Guide Correction
Description of change:
Note the following addenda under \'Calculating Materials Costs to Achieve MR Credits\' on page 337:Add the following after "...Furniture and Furnishings as long as this is done consistently across all MR credits.", "Exclude artwork, interior plants, and musical instruments."
Campus Applicable
No
Internationally Applicable:
No
2/1/2010Updated: 2/14/2015
Reference Guide Correction
Description of change:
At the end of the third line of the second paragraph, insert a period
Campus Applicable
No
Internationally Applicable:
No
8/2/2008
LEED Interpretation
Inquiry:

Our project features a custom Glazed Aluminum Curtain Wall skin. The curtain wall contractor will obtain custom-made glass, aluminum, and steel components from its suppliers. In order to facilitate material transport and installation, the contractor has elected to construct unitized curtain wall sections of various sizes and shapes in the shop before transporting the sections to the site and mounting them on the building. Because the curtain wall sections are composed of multiple materials, the sections could be considered individual "assemblies" according to the Reference Guide. If an assembly calculation is used, the relative weights of the components in each section would have to be used to determine the recycled value of each individual section. We submit that it is appropriate to calculate the recycled value of the curtain wall using the original components, rather than performing an assembly calculation for the individual unitized sections. The custom-made glass, aluminum, and steel components used in the construction of the sections can be accounted for pre-assembly. The contractor is able to identify the cost and recycled content information for each type of material. Since the recycled content value of the curtain wall\'s component materials can be accurately tracked using our proposed approach, the intent of the credit is maintained, as preference can be given to materials containing recycled content. Please confirm if this approach is acceptable.

Ruling:

The project is inquiring if it is acceptable to calculate recycled content based on actual components of an assembly rather than the weight of the assembly. This approach is acceptable as long as the project has access to individual cost and recycled content information for each of the assembled product\'s components. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
4/2/2014
LEED Interpretation
Inquiry:

Please provide clarification on documentation of recycled content claims and FSC certified claims for woods products such as particleboard, MDF and other composites.

Ruling:

The project team in inquiring how to document products with valid recycled content claims as well as FSC certification. Products identified as FSC Mix Credit or FSC Mix [NN] % also have pre- or post-consumer recycled content, the latter of which is commonly reported separately by the product manufacturer. In these instances the project team must choose whether to classify the product (or some fraction of the assembly) as FSC certified or as recycled content; the material cannot contribute to both claims simultaneously. Specifically claims may be made under either MRc4: Recycled Content, or MRc7: Certified Wood. Note that for recycled content claims the material must meet the definition of ISO 14021 as required by LEED.

Campus Applicable
No
Internationally Applicable:
Yes
8/9/2006
LEED Interpretation
Inquiry:

Our project is a 185,000 SF lab. The lab is served by a Satellite Energy Plant (SEP) of 6,265 SF, being constructed concurrently, but on a separate site. We intend to apply for certification for only the lab building and not the SEP. Both buildings are currently under construction and the contractor is tracking the materials and providing us submittals for the MR Credits. However the contractor is not able to separate the materials\' submittals (e.g. steel) for the two buildings, without considering it a change-order or requiring a re-bid from the sub-contractors. We foresee the SEP materials to be a very small portion of the materials used. We have detailed cost estimates based on construction documents that give us a split between the two buildings. We would like to use these cost estimates to calculate and thus split the relevant material quantities in the contractor\'s submittals so that we can count the materials appropriately for the lab building in our certification documentation. Is this approach acceptable to you? If not, can you suggest another approach, that would be acceptable given our circumstances, that would avoid a re-bid or change order?

Ruling:

It is acceptable to use estimates when breaking down the materials costs for the MR credits, thus your proposed approach is a good one. As a reminder, it is important to use a consistent project definition across all LEED credits, so be sure to make the same divisions in the SS, WE, EA, and IEQ credits. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
12/2/2005
LEED Interpretation
Inquiry:

Our project is located in Los Angeles, California. Construction waste is sorted at the jobsite into various boxes i.e. wood, metal, concrete/inert material, drywall/gypsum, co-mingled recycled waste (small wood scraps, wire cuttings, conduit, metal stud cut offs, etc.), and general trash boxes. A contracted hauler regularly collects these boxes. General trash is taken directly to the landfill where it is weighed and then buried. Separated recycling materials are taken to various certified City of Los Angeles recycling facilities where they are weighed and processed. Co-mingled recycled waste is taken to special certified recycling facilities where the co-mingled mix is weighed and then the recyclable materials are removed from the mix and sent to appropriate facilities for processing. This process does not allow for each recyclable material type from the co-mingled load to be weighed separately. The City of Los Angeles\' Department of Sanitation audits all of the co-mingled sorting facilities on a regular basis and establishes a yearly average recycling percentage rate for "each" facility. The certification recycling percentage rates vary. When calculating the construction waste recycling percentage for MRc2.1, will the USGBC accept the City of Los Angeles\' annual recycling percentage rate for the "specific" facility that accepts this LEED project\'s co-mingled component of the project\'s waste stream?

Ruling:

The average annual recycling rate for the specific sorting facility is acceptable as long as the facility\'s method of recording and calculating the recycling rate is regulated by a local or state government authority (as is the case for your project). Applicable Internationally.UPDATE 10/1/12: Made applicable to LEED EB 2008 and 2009.

Campus Applicable
No
Internationally Applicable:
Yes
5/9/2011
LEED Interpretation
Inquiry:

Can waste diversion rates be documented as an average recycling rate for an integrated waste management operation serving a market area as opposed to the average for a single facility?Does the USGBC offer a prescriptive method for facilities to back-up commingle recycling percentage claims? Is visual inspection of project loads an acceptable method for documenting recycling rates? When calculating recycling percentages the USGBC does not seem to have a limit on how much ADC can be claimed as a "recyclable" commodity.

Ruling:

A system recycling rate is acceptable as long, as the recycling rate utilized is regulated by a local or state government authority as a closed system, in compliance with the LEED-NC 2.1 CIR dated 12/2/2005 (#3000).For project using a project specific diversion rate, visual inspection is not an acceptable method of inspection for purposes of documenting percentage of commingled waste diverted from landfill. Currently ADC is an acceptable method for compliance with this credit. ADC meets the intent of MRc2. At this time there is no limit as to how much ADC can be used to fulfill credit compliance. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
2/6/2007
LEED Interpretation
Inquiry:

This CIR asks for further clarification of the ruling dated 3/23/2004 that states "Incineration cannot be used as an alternative method for diverting waste from the landfill for purposes of credit achievement." Our recycling facility processes construction and demolition (C&D) debris into numerous commodities. One of these products is Wood Derived Fuel (WDF) which is sold to local paper mills to replace virgin wood, natural gas and oil. While the product is burned, it is not incinerated. The USEPA has recently provided a category for such materials and defined them as Biofuel: A gaseous, liquid, or solid fuel that contains an energy content derived from a biological source. WDF has an energy content value of 8,500 Btus per pound of fuel and is derived from the collection, sorting and processing of C&D waste. The LEED Reference Guide defines recycling as "the collection, reprocessing, marketing and use of materials that are diverted or recovered from the solid waste stream." Before accepting co-mingled C&D debris for processing, the recycler we use demands that we provide Asbestos Hazard Emergency Response Act (A.H.E.R.A.) documentation proving the C&D loads have been inspected and abated. In addition, they maintain on-site testing equipment to detect lead & asbestos (such as XRF for lead and a polarized light microscope for asbestos). C&D debris that passes these tests is then accepted and sent through an elaborate sorting system where commodities ranging from LDPE plastic to Steel are separated and sold. Wood represents the largest volume of material they accept and is processed into 4-different commodities including WDF, Colorized Mulch, Pulp Furnish and Alternate Daily Cover. Facilities that purchase WDF have boiler permits that meet the requirements of 40 CFR Part 63 of the USEPA National Emission Standards (http://www.epa.gov/epacfr40/chapt-I.info/). Prior to the development of recycled WDF, most C&D wood waste was land filled and lumber mill saw dust was used as WDF. As the market for recycled WDF has developed, its use has resulted in lumber mill wood waste residuals traditionally consumed as fuel to be up-cycled into particle board, pulp and MDF, which is currently the highest use of this resource. . When C&D wood waste is land filled, the anaerobic conditions present in a landfill result in wood waste generating large quantities of methane gas. Methane gas has a global warming potential that is 23 times more hazardous than CO2 (http://www.rmi.org/sitepages/pid1215.php, November 08, 2006), where as consuming WDF in a modern industrial boiler is considered carbon neutral. The CIR ruling dated 3/23/2004 specifically denies diversion credit for C&D debris delivered to a mass-burn incinerator that uses excess heat to generate electricity, (Waste to Energy, WTE). The CIR recognized that the primary function of a WTE incinerator is to reduce the volume of waste placed in a landfill. The incinerator accepts everything that could be delivered to the landfill and they charge as much or more than is typically charged for landfill disposal. In contrast, our permitted recycling facility creates a recycled content commodity that is sold for profit. They manufacture WDF from a portion of the C&D debris they receive and they sell the WDF to paper mills that operate USEPA permitted industrial boilers to produce the heat energy needed to manufacture and recycle paper. Use of this product as a commodity is consistent with the LEED Reference Guides definition of recycling and with CIR dated 5/17/2004 for the production of Alternative Daily Cover. Audit documentation, such as receipts of sale of WDF to USEPA permitted facilities, can provide evidence of material diversion as WDF. For these reasons, we believe producing Wood Derived Fuel (WDF) meets the intent of the credit and seek to gain a ruling as such from the USGBC materials TAG.

Ruling:

Based on the process description provided, Wood Derived Fuel (WDF) meets the intent of this credit. The WDF process described differs from incineration processes that are not allowed in this credit because the recycling facility provides a value-added process; it is a service that exists to sort and distribute materials appropriate to the highest end uses possible. In addition, the revenue generated by the WDF commodity helps to make this business successful and thus facilitates recycling of wood to other end uses as well as recycling of other materials. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
8/29/2003
LEED Interpretation
Inquiry:

One of the most significant materials we have specified for this project is a wall system that is comprised of recycled polystyrene embedded in a Portland cement matrix cast into panels to provide both structural support, and a high insulation value. This system (Perform Wall) has an average weight per panel (10"x15"x10\') of 156 lbs. Because polystyrene is so much lighter than cement, the polystyrene within the panel only weighs 37lbs, but comprises 85% of the panel by volume. We have this information documented from the manufacturer. To calculate the percentage of recycled material based on the criteria of weight only, the polystyrene would only be 24 % of the total weight, while the manufacturer states that the polystyrene is 85% of the product volume. We believe we have followed the design intent by specifying a product with a high percentage of recycled content, and would like to be granted an exception to the calculation method and be permitted to utilize the 85% for submittal purposes. We will include the manufacturer\'s information in the submittal.

Ruling:

The LEED Version 2.0 Reference Guide (page 194) provides guidelines for calculating the recycle content of materials. The method described above uses Equation 3 (Assembly Recycled Content) methodology for the concrete-based wall system. Given this is based on weight, and since the polystyrene is a lighter material than the concrete, the equation does unfortunately reduce the assembly\'s overall recycled content value.An alternative calculation methodology is to apply Equation 1 (Recycled Content Value). This would require itemizing the materials/components that make up the wall system and determining both their individual costs as well as the percentage of post-consumer and post-industrial recycle content. Calculations done this way may result in a higher recycle content value in comparison to using the other method. The manufacturer of this system should be able to provide individual costs and the respective recycled content for all the materials. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/9/2011
LEED Interpretation
Inquiry:

A CS project is inheriting an existing building that still has furniture from the previous tenant. The project team is seeking clarification on how to account for this furniture in MRc2 and how to document the selling of this furniture to a re-seller.

Ruling:

Furniture may be included within its own category, without the need to breakdown the material composition unless components of the furniture are to be salvaged independently. In addition, diversion by re-sale is acceptable. The project team is required to document the receiving company (such as through a contract or sales receipt) and confirm that furniture is intended to be re-sold by that company. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/29/2008
LEED Interpretation
Inquiry:

Our LEED NC v2.2 registered project includes pursuit of MRc2 - Construction Waste Management credits and we would like to know if our strategy for compliance is acceptable. We have been actively sorting and recycling wood, concrete/masonry, metals, cardboard, paper and plastic in a region of the country which has severely limited available CDL recycling facilities, due primarily to the negative impacts of hurricane Katrina in 2005. To date, approximately 16,000CY of excavated soil from our project site has been removed and donated to a non-profit, private school to assist in preparing their site on campus facility expansions. The school site is located approximately 500 feet from our project site. If the excavated soil were to have been hauled off to a landfill, the travel distance would have been greater than 25 miles one-way. It is projected that an additional 1,000CY of excavated soil from the project site will also be made available to the school as our project progresses. We are aware the LEED NC v2.2 MRc2 - Construction Waste Management credit requirements indicate excavated soil does not contribute to this credit, however the excavated soil was donated to a neighboring school which the credit requirements make special note that ".diversion may include donation of materials to charitable organizations.". We believe we are meeting the intent of the credit by diverting construction and demolition debris from disposal in area landfills and in addition, we are significantly reducing environmental impact from transportation vehicle emissions and providing a non-profit organization with materials to provide site expansion.

Ruling:

While your strategy for handling excavated soil provides environmental benefit in reduced transportation of materials, it does not justify inclusion of excavated soil in MRc2. It is understood that many projects face challenges related to local market conditions for recycling. However, the weight of the soil would overwhelm the total amount of construction and demolition waste and enable credit achievement without addressing those impacts. As a result, the donated soil cannot be included in MRc2. You may want to consider evaluating the environmental benefits of the soil donation in the context of overall project emissions during construction and applying for an Innovation credit. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/28/2008
LEED Interpretation
Inquiry:

When removing petroleum contaminated soils there are two options for disposal. One would be to haul the contaminated soils to a hazardous materials landfill. The other option is to incinerate the soil to burn off the petroleum and remediate the soil into a environmentally safe product. In the case of Biomed project we elected to have the contaminated soils recycled (incinerated). During the site cleanup WT removed 787.4 TONS of contaminated soils from the project site. We are currently applying for the "Brownfield Credit" which all of this documentation will be sent to document the cleanup. Also LEED specifically says that land clearing waste (soils) cannot be included in the waste management plan, but for this case we feel that because of the soils were recycled from a hazardous material that we should be able to apply the tonnage to our waste management calculations. Can we use this toward this credit too?

Ruling:

Incinerating soil to remove contamination can not be considered recycling and apply to MRc2. It is not clear that incinerating contaminated soil is environmentally preferable to landfilling. Both hazardous waste and soil must be excluded from calculations for MRc2, and incineration is not an allowable diversion method, per the LEED-NC v2.2 Reference Guide. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
11/1/2011
LEED Interpretation
Inquiry:

The proposed project site is located on a military base that has potentially unexploded ordnance on-site.Protection from potential detonation during construction is required by the federal government to shield pedestrians and existing housing across the street from the project site. As a part of the project, a detonation barrier is to be constructed prior to start of excavation. This barrier can be built using various material but must have substantial foundations and structural strength to withstand large explosion forces. After construction is completed, the detonation barriers would be deconstructed to allow access to the site.The project team is proposing to incorporate salvaged local material into the design of these barrier walls. May the salvaged material qualify for MR credit 5 for regional material, MR credit 4 for recycled content?

Ruling:

The project team has inquired whether materials used for a temporary (during construction) detonation barrier can be included within the project material cost accounting since it is mandated to be built, particularly as it relates to recycled content, local material content, and construction waste management. No, the LEED Reference Guide for Green Building and Construction 2009 Edition Materials and Resources credits 3, 4, 5,and 6 "Include only materials permanently installed in the project" temporarily installed materials are considered equipment and cannot be included in MR Credits 3-6.

Campus Applicable
No
Internationally Applicable:
No
6/19/2008
LEED Interpretation
Inquiry:

Our major renovation project is a high-rise building in Germany. One of the recycling methods we apply is underground waste disposal, also called mine backfill (Bergversatz), a method which, in Germany, is governed by statutory provisions. Since with our project, a relatively large amount of material (gypsum waste, sheet glass, gypsum fiberboard panels, etc.) is disposed of in this manner, we would like to make sure that this way of recycling is acceptable in line with the Credit Intent. Underground waste disposal or mine backfill means that exploited deep mines are backfilled with liquid or solid mining or non-mining materials. Depending on their nature, the filling materials are stored in barrels or packed in big bags and their storage is controlled. The backfill may also consist of bulk material. Under the German Closed Substance Cycle and Waste Management Act (Kreislaufwirtschafts- und Abfallgesetz) and, in addition, under the German ordinance on the underground disposal of waste (Bergversatzverordnung) it is specified that if this disposal serves an economic purpose, e.g. if it prevents a mine from collapsing by filling it air-free, it is not considered as waste disposal but rather as waste recycling. Furthermore, for every 500 metric tons, analyses must be performed and submitted which confirm that the underground waste material is recognized as safe. As under the applicable German laws and regulations, underground waste disposal is recognized as recycling, we would like to know whether this recycling method complies with the requirements of the LEED Credit Intent and whether LEED also recognizes underground waste disposal as a means of recycling?

Ruling:

The applicant has requested acceptance of mine backfilling as an equivalent means of accomplishing construction waste management. Based on the description of the process, it does not appear that this practice will meet the intent of the credit. In addition to encouraging the diversion of debris from landfills, the credit intent includes an expectation that projects "redirect recyclable recovered resources back to the manufacturing process." While it is recognized that using clean waste material from construction rather than other potential materials to back fill deep mines may be environmentally preferable, this practice is not aligned with the intent of the credit. The waste is in essence going to a "landfill" and the specific materials noted (gypsum and glass) are known to be potential feed stocks for manufacturing processes. By using them as fill material, the proposed practice is burying potentially valuable raw materials. Underground waste disposal is not a recognized means of recycling for this credit. Applicable Internationally; Germany.

Campus Applicable
No
Internationally Applicable:
Yes
10/1/2013
LEED Interpretation
Inquiry:

For applicable MR credits, is it acceptable to use new or updated versions of CSI Master Format editions in lieu of versions referenced in reference guides or submittal requirements?

Ruling:

The applicant is requesting a ruling on whether or not the project Can use CSI Master Format 2010 Edition, Divisions: 03-10, 31 (Section 31.60.00 Foundations), and 32 (sections 32.10.00 Paving, 32.30.00 Site Improvements, and 32.90.00 Planting), in lieu of CSI Master Format 2004 Edition. Yes, it is acceptable to use new or updated versions of CSI Master Format editions in lieu of versions referenced in reference guides or submittal requirements. Ensure that the Master format divisions used correlate to the referenced the CSI Master Format version in the LEED reference guide for that rating system.

Campus Applicable
No
Internationally Applicable:
Yes
10/1/2012
LEED Interpretation
Inquiry:

We are performing a comparative analysis for fiberglass insulation regarding MR Credit 4: Recycled Content. Depending on the manufacturer, recycled content is reported either a plant- and product-specific average, or a country-wide average (various plants and products). We have contacted a manufacturer using North American average recycled content claims, and they state that the recycled content across their facilities and product lines can range from 0-70%. Are country-wide recycled content averages acceptable as documentation for MR Credit 4: Recycled Content? If country-wide averages are not acceptable, what level of specificity is acceptable?

Ruling:

***Update 1/1/13: The original ruling is no longer valid and has been superseded by the language below. The project team is requesting clarification regarding the documentation of recycled content for Materials and Resources Credit 4: Recycled Content. Recycled content claims must be specific to the installed product. The installed product refers to a unique product distinguished by color, type, and/or location of manufacture as identified to the consumer by SKU or other means. It is acceptable to use an average recycled content value stated by a single manufacturer for a single product. Recycled content claims for custom products are required to be product specific; industry wide or national averages are not acceptable for the purposes of LEED documentation. Note, for the purposes of LEED, steel has a previously established industry average of 25% post-consumer recycled content which does not require documentation on a per product basis. In all cases, if recycled content is given as a range then the lowest recycled-content percentage will be used for LEED documentation. Applicable Internationally.Original Ruling: The project team is inquiring about the acceptability of using a country wide average value for recycled content of a product. An average recycled-content claim, especially one that incorporates multiple product lines or places of manufacture, does not meet the credit intent and is not acceptable for LEED documentation. The product that is known to have zero recycled-content may be unduly benefiting from the recycled-content of other products/manufacturing facilities. Recycled-content claims must be specific to the installed product (and therefore place of manufacture), regional or national claims do not meet credit requirements. If product-specific recycled content is given as a range, then the lowest possible actual recycled-content number must be declared for LEED documentation. GBCI recognizes that this presents a challenge to design and construction teams as it is often not possible to specify or even identify-- the location of manufacture for a number of materials. It is hoped that manufacturers will respond to market demand for useful, credible product information. Note that this ruling does not apply to steel products, which have an established average recycled content of 25% and do not require documentation on a per product basis when that value is used in the LEED calculator. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
9/5/2008
LEED Interpretation
Inquiry:

The project team is seeking clarification for our intended use of on-site excavated rock. During excavation and site work at the project, a large amount of limestone rock was encountered. Instead of disposing of the rock off-site, we are using it on-site. We are breaking up the on-site rock into 12 - 18" pieces for use as rip-rap. This eliminates the need to use virgin quarry rock and reduces the amount of the volume of waste sent to the landfill. We would like to apply the market value of the rip-rap to MR credit 4.1, Recycled Content (pre-consumer). We will use the following formula for our calculations: # of Tons of excavated rock used on site * the local quarry price per ton * 1/2 = $ applied to MRc4.1 Since this approach will use what is typically a waste stream and use it to reduce the demand for off-site materials, it seems to meet the overall intent of the LEED process. If the rock cannot be applied to MRc4.1, is there any other credit that it could be applied to?

Ruling:

The project team is requesting clarification regarding on how to correctly account for rock extracted and used on site. It is good building practice to reuse materials on site and it is standard construction practice to reuse bedrock on the site (crushed or not). The reuse of these materials on site cannot be applied to MRc4 (Recycled Content), however, the value of the rip-rap may be applied to the calculations for MRc5 (Regional Materials), as calculated by the following equation: # of Tons of excavated rock used on site * the local quarry price per ton undelivered = $ applied to MRc5. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/29/2009
LEED Interpretation
Inquiry:

Methodology #1 Each co-mingled load of construction debris is weighted at the MRF and visually inspected then the percentage of each recyclable material is tallied. The recyclable materials are then processed for sale on the secondary market. The tallied data is documented in a running monthly report created by either the MRF or the Hauler and is submitted to the contractor for the project. Methodology #2 The MRF\'s self-reported recycling percentage rate (for the entire facility) is applied toward specific LEED projects\' delivered co-mingled tonnage brought to that facility. We are aware of the CIR ruling dated 12.2.05 stating that a project can use this methodology if a facility has government oversight over a facility\'s recycling rate calculations. In our case we have government oversight of the MRFs overall recovery rates but the reporting methodology required by the oversight agency doesn\'t account for C&D debris - asphalt, gypsum wallboard, and concrete tonnage which is processed through those facilities. LEED NC v2.2 accepts and credits concrete towards MRc2 but this disconnect between how the oversight agency tracks materials versus what is actually processed in a facility doesn\'t allow for accurate reporting and subsequent award of LEED credit in our local market. Please let us know if one or both methods are acceptable for tracking and documenting co-mingled boxes for MRc2.

Ruling:

This CIR asks if the USGBC can advise if one or both of two listed methods for documenting the recycled content of commingled waste are acceptable. In Methodology #1, if the facility is giving project specific recycling rates, they need to document actual percentage of material recycled based on actual weight or volume of material. Visual inspection is not an acceptable method. For "Methodology #2," the facility must be able to document that the "method of recording and calculating the recycling rate is regulated by a local or state government authority" in accordance with CIR dated 12/2/2005. If the facility\'s reported recycling rate is regulated by a local or state government, then it can be used toward achievement of the credit. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
11/3/2006
LEED Interpretation
Inquiry:

As stated in CIR ruling dated 8/29/2003, "Mechanical (mainly HVAC ductwork and equipment) and electrical system components (smaller infrastructure-type items such as wires, cables, junction boxes) are to be excluded from the LEED calculations. If a project team chooses to include additional items as part of the base material cost, such as elevators, appliances, hot tubs, or other semi-mechanical/electrical components, it should do so for all relevant material credits, which include MR Credits 3, 4, 5 and 6." Does this exclusion include thermal insulation for mechanical and plumbing systems, or is mechanical and plumbing insulation considered a "semi-mechanical component"? Furthermore, does this exclusion apply to self-insulated HVAC ducts, including fiber glass duct board ducts and flexible insulated ducts? Recycled content is currently available for these materials and excluding them would not provide incentive to manufacturers for increasing their use of recycled content, or motivate projects to incorporate recycled-content insulations. These products are lightweight and of low relative cost, and would not unduly affect other recycled content decisions.

Ruling:

Note that the referenced CIR is from NCv2.1, and your CIR was submitted for v2.2. Version 2.2 credit requirements state that mechanical, electrical and plumbing components shall not be included. The Reference Guide provides additional detail, although it does not clearly address your question. The phrase "Mechanical, electrical and plumbing components" refers to all items specified within CSI MasterFormat 1995 Divisions 15 and 16. Aside from the rationale stated in the Reference Guide (re: high-priced assemblies/equipment that would skew calculations), it is hoped that in general this approach provides a fairly level playing field between LEED projects and avoids a project\'s inquiries about recycled content in products for which data is difficult or impossible to gather, and where recycled content is not generally going to be influenced by LEED. Admittedly, this is a broad-brush solution that may miss some incentive opportunities, but the scope of materials for this and similar MR credits requires consideration of both technical and administrative issues for LEED. These credits were originally designed around Divisions 2 through 10: products considered the most practical to influence, the most practical upon which to create credit calculations, and which represent the bulk of a building\'s mass. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/17/2002
LEED Interpretation
Inquiry:

This project has contracted with the construction waste hauling company Richard S. Burns and Company, Inc. (here after known as RSBCO) who will take all construction waste from our project and recycle about 90% of it through a patented process that produce several products. These recycled construction waste products are unconventional and one of the products is sold for use in landfill operations. We would like the USGBC to confirm that these products made from construction waste meet the intent of the MR Credit 2 - the diversion of construction waste into the commercial products stream - thereby qualifying our project for MR credits 2.1 and 2.2. RSBCO has developed and patented a specific process of receiving, sorting, grinding, and blending construction waste materials to recover recyclable materials and produce desired products from the rest of the waste. The process begins with screening out fine particles for later use. The material then moves through a positive sorting process where individually recyclable materials like ferrous and non-ferrous metals, cardboard, masonry, and wood are recovered. RSBCO sells ferrous and non-ferrous metals and cardboard to secondary processing markets. On-site, RSBCO processes masonry and wood into a clean fill product used around pipes, in drainage trenches, or as substrate for road construction. We think the recovered recyclable materials and the clean fill product both clearly meet the intent of the MR credit 2.The process continues with negatively sorting the remaining construction material to remove undesirable materials such as plastic trash bags and clothing. This undesirable material represents less than 10% of total materials received and is continuously scrutinized for further recycling opportunities. The remaining material is then ground, screened again for metal recovery, and sized. The ground and crushed aggregate from all stages of the process are then blended in specific proportion to create a product called Barrier

Ruling:

This approach seems to meet the intent of MR Credits 2.1 and 2.2. Keep track of recycling rates according to credit requirements. The only clarification necessary is whether the Barrier product described is in fact used as a cover material with value to the landfill. Because the credit language requires the project to demonstrate recycling, salvage, and landfill rates, you will need to provide some documentation that the Barrier product is USED BY the landfill as described, and not just DISCARDED AT the landfill.

Campus Applicable
No
Internationally Applicable:
No
5/9/2011
LEED Interpretation
Inquiry:

Is lead-based paint containing material considered hazardous for the purposes of LEED and therefore eligible for exclusion from the calculations of waste diversion?

Ruling:

Yes, teams may exclude lead-based paint contaminated drywall from your construction waste management calculations. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/1/2013
LEED Interpretation
Inquiry:

Is a campus-like approach for MRc2 acceptable for two LEED-NC v2009 registered projects each pursuing one-off certification? Space is limited on the urban site for recycling dumpsters, therefore the best approach for CWM may mean that waste and recycling for all LEED registered projects will need to be aggregated and tracked together. AGMBC Master Site / Campus is not utilized, yet we propose using the AGMBC precedent for MRc2 documentation. We propose to track together all demolition, construction waste/diverted, & land clearing material for the project and then apply a weighted average based on GSF to each LEED project.

Ruling:

The applicant has requested to use a weighted average approach for Materials and Resources Credit 2 Construction Waste Management for several buildings that are pursuing one-off LEED Certification under LEED BD&C. Yes, the project may utilize a weighted approach based on gross floor area to determine the total construction waste for each building pursuing certification. For each LEED BD&C Building, the project team will be required to identify the materials that are diverted from disposal and provide calculations documenting the diversion rate. Each building must meet the required threshold for waste diversion in order to earn the credit. In addition, the Construction Waste Management (CWM) Plan must outline goals for diversion for each building, not just as an aggregate across all projects. Note that if the waste is comingled and sorted offsite, the project may follow the requirements outlined in LEED Interpretation 3000 for determining and documenting the diversion rate. This ruling addresses only projects pursing LEED Certification under the BD&C Rating Systems and does not set any precedent or guidelines for projects pursuing certification under different LEED Rating Systems. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/14/2007
LEED Interpretation
Inquiry:

Our project is located on a Washington State DSHS-JRA Juvenile Rehabilitation Administration (Detention) Campus in Chehalis called Green Hill School. The project consists of two new commercial buildings replacing two obsolete buildings (demolished in this project). Both new buildings, Heath Center/Administration (HCA) and Intensive Management Unit (IMU), will be placed on the same site area (building footprint) as one of the obsolete buildings (Building \'X\'). Each new building footprint covers approximately 1/2 the existing footprint of the obsolete Building \'X\'. After the demolition of the 2nd obsolete building (Building \'W\'), this area and other disturbed areas will be restored with native/adaptive landscaping to create a green space. Only the HCA building will be pursuing USGBC recorded status of LEED Silver. The HCA building consists of a Health Center including medical, dental, and mental health services on the first floor and Administration offices on the second floor. This project will be completed in 3 phases, two bid packages and two separate Contractors. We are proposing one consistent LEED boundary that we will use for all the LEED credit. The entire project will have 3 different construction and TESC boundaries that will be different from the LEED boundary due to the phasing of demolition and construction and the inclusion of the IMU bldg (which is not pursuing LEED) in the construction boundary. Bid Pack #1 - Site Utilities and Demolition of Building \'X\' summer \'07 Bid Pack #2 - Phase I - New Construction of HCA & IMU building (in footprint of demolished bldg \'X\') spring to winter \'08 Phase II - Demolition of Bldg \'W\' and restoration of native/adaptive landscaping winter \'08/spring \'09 We could include 1/2 of Bldg \'X\' within our LEED boundary OR exclude Building \'X\' demolition from the LEED scope of work. We are planning to divert this demolition waste from the landfill, but the paperwork may be confusing with only 1/2 the building counting towards our LEED credits and the paper work from demolition of Building \'X\' will be from a different Contractor. Bldg \'W\' will be included in the LEED boundary and is in the same Bid Pack #2 that includes the new construction, although this demolition and restoration of landscape will be Phase II. Prior to demolition, a full hazardous material abatement would be completed to abate asbestos, mercury, and lead based paints. Demolition of building \'X\' and \'W\' would mostly consist of grinding up concrete into a rocky base coarse which would be used as base material along the perimeter road of the secured campus. Temporary stockpiling of soils from demolition of Building \'X\' and preparation of the site will be used to fill-in area of demolition of Building \'W\'. We propose that the LEED boundary for our HCA building would include half of the footprint of the demolished Building \'X" and the entire footprint of the demolished building \'W\' (excluding the other new building - IMU building which in located over the other 1/2 of Building \'X\'). The inquiry is: Is our proposal for our LEED boundary acceptable? Based on the LEED site boundary described above, is it permissible to have 3 different phased TESC boundaries and Construction boundaries beyond the one consistent LEED boundary for the HCA building? Is it permissible to calculate only the portion of the demolition of Bldg \'X\' which is in the LEED boundary toward MRc2 with the paper work being provided from a different contractor?

Ruling:

The applicant is asking whether their proposed LEED boundary and allocation of demolition debris is acceptable. The proposed LEED boundary is acceptable as long is it is used consistently across all LEED credits. The allocation of only the portion of demolished Building "X" within the LEED boundary is also consistent with credit requirements. The allocation of the entire demolition of Building "W" is acceptable, as long as this is within the scope of the project seeking LEED certification. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/16/2007
LEED Interpretation
Inquiry:

Due to late incorporation of construction waste recycling during the construction process, meeting the minimum recycled waste threshold of 50% would not be feasible even if all waste was recycled from now until project completion. This situation accounts solely for the core and shell portion of the structure as this is the portion of the project included in the scope of LEED-CS certification. The project team is interested in providing recycling containers for what remains of core and shell construction, as well as for the tenants during their fit out construction, which has not yet begun. Is there an opportunity for the project to obtain the MRc2.1 point if they can demonstrate that 50% of the remaining core and shell construction waste as well as tenant fit out construction waste is recycled? If this proposed compliance path diverges too far from the original credit structure, would it be possible to merit an ID point for this effort?

Ruling:

If 50% waste diversion cannot be documented for the whole core and shell construction, this credit cannot be earned. In addition, as tenant fit-out is not part of the scope of core and shell, this waste diversion cannot count under LEED-CS. Innovation and design points are awarded for exemplary performance of MRc2, for which the threshold is 95% diversion. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/9/2011
LEED Interpretation
Inquiry:

In the waste diversion process many questions have come up regarding utilizing Waste-to-Energy as a landfill diverstion strategy. Can Waste-to-Energy be utilized as a landfill diversion strategy if; this effort ran parallel to sorting recyclable and reusable materials, and the power plant proposed has approved EPA pollution control devices. Alternatively, can paying additional cost to transport non recyclable trash to a Waste-to Energy power plant to be incinerated and converted into electrical energy count as diverted waste?

Ruling:

Only wood derived fuel can contribute to MRc2 in this manner. Incineration cannot be used as an alternative method for diverting waste from the landfill for purposes of credit achievement. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
3/10/2008
LEED Interpretation
Inquiry:

Intent: "Increase demand for building products that incorporate recycled content materials, thereby reducing impacts resulting from extraction and processing of virgin materials." The project targeting LEED-CS certification is located in Ontario, Canada. The LEED-CS Reference Guide requires that "SCMs as a percentage of total cementitious materials" and the "Dollar value of all cementitious materials" are provided by the manufacturer. The Redimix Concrete Association of Ontario states that concrete mixes are confidential, and as such will not divest the "Dollar value of all cementitious materials" as required by the LEED-CS Reference Guide. (For LEED Canada-NC projects, it is standard practice in Ontario for concrete suppliers to provide the overall recycled content of concrete in a signed letter.) To accommodate this situation, we propose the following documentation approach to the LEED-CS version of the SCM calculation. Following these steps will mathematically yield the same result as the procedure outlined in the LEED-CS Reference Guide: 1) The supplier determines the recycled content value due to SCMs for the entire project by multiplying the "SCMs as a percentage of total cementitious materials" and the "Dollar value of all cementitious materials". 2) The supplier provides a signed letter indicating the recycled content value due to SCMs for the entire project. 3) When completing the letter template, instead of providing the value of all cementitious materials and the recycled content, we provide the recycled content value due to SCMs, and indicate that the recycled content is 100% (pre-consumer). Please confirm if this approach is acceptable.

Ruling:

The project team has requested an alternative compliance path for determining the value of Supplementary Cementitious Materials (SCM) due to confidentiality issues. If SCMs are used as part of the percentage recycled content, a letter signed by the concrete supplier/manufacturer or professional engineer must be submitted that certifies the reduction in Portland cement from BASE MIX to ACTUAL SCM MIX (as a percentage of weight). This can be provided as a total reduction in Portland cement for all the concrete used on the project. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
6/8/2009
LEED Interpretation
Inquiry:

During construction while excavating for placement of compacted sub-grade and asphalt, limestone was found on our project site. Due to its location and interference with the parking surface elevation, the rock was removed and donated to the local county which was used for permanent erosion control on a different project site. Although the reference guide disregards excavated soil and land clearing debris from this credit, we propose that the limestone as a product differs from the "land clearing debris" because it is a material which can be recycled into another product that otherwise would have had to been extracted and manufactured. We believe that this attribute of the limestone allows it to count as a "reusable material". We also believe that the donation and redirection of the limestone as a reusable material for a different site, not only meets the intent of this credit by diverting waste, but is also an acceptable manner (as defined by the reference guide) by which to qualify for the credit as it is "redirecting reusable materials to appropriate sites". In keeping with the intent of this credit, can we include this rock in our MRc2 Construction Waste Management Calculations?

Ruling:

**Update October 1, 2013: This ruling is no longer valid. Please see LI 10062 for more information and an update ruling.
The project is proposing to include excavated limestone as diverted construction waste because it was given to another project to be used as permanent erosion control on another project. The LEED Reference Guide explicitly defines rock as land clearing debris and thus it can not be included in credit calculations. Previous CIR rulings dated 9/9/2008 and 3/4/2004 state the same conclusion.

Campus Applicable
No
Internationally Applicable:
Yes
11/1/2011
LEED Interpretation
Inquiry:

The proposed project site is located on a military base that has potentially unexploded ordnance on-site.Protection from potential detonation during construction is required by the federal government to shield pedestrians and existing housing across the street from the project site. As a part of the project, a detonation barrier is to be constructed prior to start of excavation. This barrier can be built using various material but must have substantial foundations and structural strength to withstand large explosion forces. After construction is completed, the detonation barriers would be deconstructed to allow access to the site.The project team is proposing to incorporate salvaged local material into the design of these barrier walls. May the salvaged material qualify for MR credit 2 Construction Waste Managementif recycled after deconstruction?

Ruling:

The project team has inquired whether materials used for a temporary (during construction) detonation barrier can be included within the construction waste management materials diverted since it is mandated to be built. If the temporary detonation barrier is recycled or salvaged after deconstruction, it meets the intent of MR Credit 2 (diversion from landfill and incineration) and may contribute towards construction waste management.

Campus Applicable
No
Internationally Applicable:
No
See all forum discussions about this credit »

Checklists

Step by step to LEED certification

LEEDuser’s checklists walk you through the key action steps you need to earn a credit, including how to avoid common pitfalls and save money.

See all forum discussions about this credit »

Documentation toolkit

The motherlode of cheat sheets

LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.

Credit achievement rate

XX%

Upgrade to LEEDuser Premium to see how many projects achieved this credit. Try it free »

LEEDuser expert

Jon Clifford

GREENSQUARE
LEED-AP BD+C

Get the inside scoop

Our editors have written a detailed analysis of nearly every LEED credit, and LEEDuser premium members get full access. We’ll tell you whether the credit is easy to accomplish or better left alone, and we provide insider tips on how to document it successfully.

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Use materials with recycled content1 such that the sum of postconsumer2 recycled content plus 1/2 of the preconsumer3 content constitutes at least 10% or 20%, based on cost, of the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows:

XX%

Upgrade to LEEDuser Premium to see how many projects achieved this credit. Try it free »

Got the gist of MRc4 but not sure how to actually achieve it? LEEDuser gives step-by-step help. Premium members get:

  • Checklists covering all the key action steps you'll need to earn the credit.
  • Hot tips to give you shortcuts and avoid pitfalls.
  • Cost tips to assess what a credit will actually cost, and how to make it affordable.
  • Ideas for going beyond LEED with best practices.
  • All checklists organized by project phase.
  • On-the-fly suggestions of useful items from the Documentation Toolkit and Credit Language.

In the end, LEED is all about documentation. LEEDuser’s Documentation Toolkit, for premium members only, saves you time and helps you avoid mistakes with:

  • Calculators to help assess credit compliance.
  • Tracking spreadsheets for materials purchases.
  • Spreadsheets and forms to give to subs and other team members.
  • Guidance documents on arcane LEED issues.
  • Sample templates to help guide your narratives and LEED Online submissions.
  • Examples of actual submissions from certified LEED projects.

I have recycled content information for a product, but it doesn’t specify whether it is pre-consumer or post-consumer. What should I do?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

The recycled content percentage on the product data sheet is given as a range. What should I do?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

The manufacturer can't give me product-specific recycled content data, but they say that they fall within the national industry average. Can I use that?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Is the default average recycled content value of 25% for steel still allowed?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Can site materials, such as soil, be included in the MR credit calculations?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Are there recycled content claims that I should be wary of?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

Can I count FSC-certified MDF toward both MRc4 and MRc7?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

If I have one cut sheet that meets the LEED 2009 requirement to upload 20% of cut sheets by cost, for this credit, is that acceptable?

The answer to this question is available to LEEDuser premium members. Start a free trial »

(If you're already a premium member, log in here.)

4/8/2016Updated: 5/4/2016
Form Update
Description of change:
added ID+C example tab and additional instructions.
Campus Applicable
No
Internationally Applicable:
No
1/15/2016Updated: 4/7/2016
Form Update
Campus Applicable
No
Internationally Applicable:
No
5/9/2011Updated: 2/14/2015
Reference Guide Correction
Description of change:
Note the following addenda under \'Calculating Materials Costs to Achieve MR Credits\' on page 337:Add the following after "...Furniture and Furnishings as long as this is done consistently across all MR credits.", "Exclude artwork, interior plants, and musical instruments."
Campus Applicable
No
Internationally Applicable:
No
2/1/2010Updated: 2/14/2015
Reference Guide Correction
Description of change:
At the end of the third line of the second paragraph, insert a period
Campus Applicable
No
Internationally Applicable:
No
8/2/2008
LEED Interpretation
Inquiry:

Our project features a custom Glazed Aluminum Curtain Wall skin. The curtain wall contractor will obtain custom-made glass, aluminum, and steel components from its suppliers. In order to facilitate material transport and installation, the contractor has elected to construct unitized curtain wall sections of various sizes and shapes in the shop before transporting the sections to the site and mounting them on the building. Because the curtain wall sections are composed of multiple materials, the sections could be considered individual "assemblies" according to the Reference Guide. If an assembly calculation is used, the relative weights of the components in each section would have to be used to determine the recycled value of each individual section. We submit that it is appropriate to calculate the recycled value of the curtain wall using the original components, rather than performing an assembly calculation for the individual unitized sections. The custom-made glass, aluminum, and steel components used in the construction of the sections can be accounted for pre-assembly. The contractor is able to identify the cost and recycled content information for each type of material. Since the recycled content value of the curtain wall\'s component materials can be accurately tracked using our proposed approach, the intent of the credit is maintained, as preference can be given to materials containing recycled content. Please confirm if this approach is acceptable.

Ruling:

The project is inquiring if it is acceptable to calculate recycled content based on actual components of an assembly rather than the weight of the assembly. This approach is acceptable as long as the project has access to individual cost and recycled content information for each of the assembled product\'s components. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
4/2/2014
LEED Interpretation
Inquiry:

Please provide clarification on documentation of recycled content claims and FSC certified claims for woods products such as particleboard, MDF and other composites.

Ruling:

The project team in inquiring how to document products with valid recycled content claims as well as FSC certification. Products identified as FSC Mix Credit or FSC Mix [NN] % also have pre- or post-consumer recycled content, the latter of which is commonly reported separately by the product manufacturer. In these instances the project team must choose whether to classify the product (or some fraction of the assembly) as FSC certified or as recycled content; the material cannot contribute to both claims simultaneously. Specifically claims may be made under either MRc4: Recycled Content, or MRc7: Certified Wood. Note that for recycled content claims the material must meet the definition of ISO 14021 as required by LEED.

Campus Applicable
No
Internationally Applicable:
Yes
8/9/2006
LEED Interpretation
Inquiry:

Our project is a 185,000 SF lab. The lab is served by a Satellite Energy Plant (SEP) of 6,265 SF, being constructed concurrently, but on a separate site. We intend to apply for certification for only the lab building and not the SEP. Both buildings are currently under construction and the contractor is tracking the materials and providing us submittals for the MR Credits. However the contractor is not able to separate the materials\' submittals (e.g. steel) for the two buildings, without considering it a change-order or requiring a re-bid from the sub-contractors. We foresee the SEP materials to be a very small portion of the materials used. We have detailed cost estimates based on construction documents that give us a split between the two buildings. We would like to use these cost estimates to calculate and thus split the relevant material quantities in the contractor\'s submittals so that we can count the materials appropriately for the lab building in our certification documentation. Is this approach acceptable to you? If not, can you suggest another approach, that would be acceptable given our circumstances, that would avoid a re-bid or change order?

Ruling:

It is acceptable to use estimates when breaking down the materials costs for the MR credits, thus your proposed approach is a good one. As a reminder, it is important to use a consistent project definition across all LEED credits, so be sure to make the same divisions in the SS, WE, EA, and IEQ credits. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
12/2/2005
LEED Interpretation
Inquiry:

Our project is located in Los Angeles, California. Construction waste is sorted at the jobsite into various boxes i.e. wood, metal, concrete/inert material, drywall/gypsum, co-mingled recycled waste (small wood scraps, wire cuttings, conduit, metal stud cut offs, etc.), and general trash boxes. A contracted hauler regularly collects these boxes. General trash is taken directly to the landfill where it is weighed and then buried. Separated recycling materials are taken to various certified City of Los Angeles recycling facilities where they are weighed and processed. Co-mingled recycled waste is taken to special certified recycling facilities where the co-mingled mix is weighed and then the recyclable materials are removed from the mix and sent to appropriate facilities for processing. This process does not allow for each recyclable material type from the co-mingled load to be weighed separately. The City of Los Angeles\' Department of Sanitation audits all of the co-mingled sorting facilities on a regular basis and establishes a yearly average recycling percentage rate for "each" facility. The certification recycling percentage rates vary. When calculating the construction waste recycling percentage for MRc2.1, will the USGBC accept the City of Los Angeles\' annual recycling percentage rate for the "specific" facility that accepts this LEED project\'s co-mingled component of the project\'s waste stream?

Ruling:

The average annual recycling rate for the specific sorting facility is acceptable as long as the facility\'s method of recording and calculating the recycling rate is regulated by a local or state government authority (as is the case for your project). Applicable Internationally.UPDATE 10/1/12: Made applicable to LEED EB 2008 and 2009.

Campus Applicable
No
Internationally Applicable:
Yes
5/9/2011
LEED Interpretation
Inquiry:

Can waste diversion rates be documented as an average recycling rate for an integrated waste management operation serving a market area as opposed to the average for a single facility?Does the USGBC offer a prescriptive method for facilities to back-up commingle recycling percentage claims? Is visual inspection of project loads an acceptable method for documenting recycling rates? When calculating recycling percentages the USGBC does not seem to have a limit on how much ADC can be claimed as a "recyclable" commodity.

Ruling:

A system recycling rate is acceptable as long, as the recycling rate utilized is regulated by a local or state government authority as a closed system, in compliance with the LEED-NC 2.1 CIR dated 12/2/2005 (#3000).For project using a project specific diversion rate, visual inspection is not an acceptable method of inspection for purposes of documenting percentage of commingled waste diverted from landfill. Currently ADC is an acceptable method for compliance with this credit. ADC meets the intent of MRc2. At this time there is no limit as to how much ADC can be used to fulfill credit compliance. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
2/6/2007
LEED Interpretation
Inquiry:

This CIR asks for further clarification of the ruling dated 3/23/2004 that states "Incineration cannot be used as an alternative method for diverting waste from the landfill for purposes of credit achievement." Our recycling facility processes construction and demolition (C&D) debris into numerous commodities. One of these products is Wood Derived Fuel (WDF) which is sold to local paper mills to replace virgin wood, natural gas and oil. While the product is burned, it is not incinerated. The USEPA has recently provided a category for such materials and defined them as Biofuel: A gaseous, liquid, or solid fuel that contains an energy content derived from a biological source. WDF has an energy content value of 8,500 Btus per pound of fuel and is derived from the collection, sorting and processing of C&D waste. The LEED Reference Guide defines recycling as "the collection, reprocessing, marketing and use of materials that are diverted or recovered from the solid waste stream." Before accepting co-mingled C&D debris for processing, the recycler we use demands that we provide Asbestos Hazard Emergency Response Act (A.H.E.R.A.) documentation proving the C&D loads have been inspected and abated. In addition, they maintain on-site testing equipment to detect lead & asbestos (such as XRF for lead and a polarized light microscope for asbestos). C&D debris that passes these tests is then accepted and sent through an elaborate sorting system where commodities ranging from LDPE plastic to Steel are separated and sold. Wood represents the largest volume of material they accept and is processed into 4-different commodities including WDF, Colorized Mulch, Pulp Furnish and Alternate Daily Cover. Facilities that purchase WDF have boiler permits that meet the requirements of 40 CFR Part 63 of the USEPA National Emission Standards (http://www.epa.gov/epacfr40/chapt-I.info/). Prior to the development of recycled WDF, most C&D wood waste was land filled and lumber mill saw dust was used as WDF. As the market for recycled WDF has developed, its use has resulted in lumber mill wood waste residuals traditionally consumed as fuel to be up-cycled into particle board, pulp and MDF, which is currently the highest use of this resource. . When C&D wood waste is land filled, the anaerobic conditions present in a landfill result in wood waste generating large quantities of methane gas. Methane gas has a global warming potential that is 23 times more hazardous than CO2 (http://www.rmi.org/sitepages/pid1215.php, November 08, 2006), where as consuming WDF in a modern industrial boiler is considered carbon neutral. The CIR ruling dated 3/23/2004 specifically denies diversion credit for C&D debris delivered to a mass-burn incinerator that uses excess heat to generate electricity, (Waste to Energy, WTE). The CIR recognized that the primary function of a WTE incinerator is to reduce the volume of waste placed in a landfill. The incinerator accepts everything that could be delivered to the landfill and they charge as much or more than is typically charged for landfill disposal. In contrast, our permitted recycling facility creates a recycled content commodity that is sold for profit. They manufacture WDF from a portion of the C&D debris they receive and they sell the WDF to paper mills that operate USEPA permitted industrial boilers to produce the heat energy needed to manufacture and recycle paper. Use of this product as a commodity is consistent with the LEED Reference Guides definition of recycling and with CIR dated 5/17/2004 for the production of Alternative Daily Cover. Audit documentation, such as receipts of sale of WDF to USEPA permitted facilities, can provide evidence of material diversion as WDF. For these reasons, we believe producing Wood Derived Fuel (WDF) meets the intent of the credit and seek to gain a ruling as such from the USGBC materials TAG.

Ruling:

Based on the process description provided, Wood Derived Fuel (WDF) meets the intent of this credit. The WDF process described differs from incineration processes that are not allowed in this credit because the recycling facility provides a value-added process; it is a service that exists to sort and distribute materials appropriate to the highest end uses possible. In addition, the revenue generated by the WDF commodity helps to make this business successful and thus facilitates recycling of wood to other end uses as well as recycling of other materials. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
8/29/2003
LEED Interpretation
Inquiry:

One of the most significant materials we have specified for this project is a wall system that is comprised of recycled polystyrene embedded in a Portland cement matrix cast into panels to provide both structural support, and a high insulation value. This system (Perform Wall) has an average weight per panel (10"x15"x10\') of 156 lbs. Because polystyrene is so much lighter than cement, the polystyrene within the panel only weighs 37lbs, but comprises 85% of the panel by volume. We have this information documented from the manufacturer. To calculate the percentage of recycled material based on the criteria of weight only, the polystyrene would only be 24 % of the total weight, while the manufacturer states that the polystyrene is 85% of the product volume. We believe we have followed the design intent by specifying a product with a high percentage of recycled content, and would like to be granted an exception to the calculation method and be permitted to utilize the 85% for submittal purposes. We will include the manufacturer\'s information in the submittal.

Ruling:

The LEED Version 2.0 Reference Guide (page 194) provides guidelines for calculating the recycle content of materials. The method described above uses Equation 3 (Assembly Recycled Content) methodology for the concrete-based wall system. Given this is based on weight, and since the polystyrene is a lighter material than the concrete, the equation does unfortunately reduce the assembly\'s overall recycled content value.An alternative calculation methodology is to apply Equation 1 (Recycled Content Value). This would require itemizing the materials/components that make up the wall system and determining both their individual costs as well as the percentage of post-consumer and post-industrial recycle content. Calculations done this way may result in a higher recycle content value in comparison to using the other method. The manufacturer of this system should be able to provide individual costs and the respective recycled content for all the materials. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/9/2011
LEED Interpretation
Inquiry:

A CS project is inheriting an existing building that still has furniture from the previous tenant. The project team is seeking clarification on how to account for this furniture in MRc2 and how to document the selling of this furniture to a re-seller.

Ruling:

Furniture may be included within its own category, without the need to breakdown the material composition unless components of the furniture are to be salvaged independently. In addition, diversion by re-sale is acceptable. The project team is required to document the receiving company (such as through a contract or sales receipt) and confirm that furniture is intended to be re-sold by that company. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/29/2008
LEED Interpretation
Inquiry:

Our LEED NC v2.2 registered project includes pursuit of MRc2 - Construction Waste Management credits and we would like to know if our strategy for compliance is acceptable. We have been actively sorting and recycling wood, concrete/masonry, metals, cardboard, paper and plastic in a region of the country which has severely limited available CDL recycling facilities, due primarily to the negative impacts of hurricane Katrina in 2005. To date, approximately 16,000CY of excavated soil from our project site has been removed and donated to a non-profit, private school to assist in preparing their site on campus facility expansions. The school site is located approximately 500 feet from our project site. If the excavated soil were to have been hauled off to a landfill, the travel distance would have been greater than 25 miles one-way. It is projected that an additional 1,000CY of excavated soil from the project site will also be made available to the school as our project progresses. We are aware the LEED NC v2.2 MRc2 - Construction Waste Management credit requirements indicate excavated soil does not contribute to this credit, however the excavated soil was donated to a neighboring school which the credit requirements make special note that ".diversion may include donation of materials to charitable organizations.". We believe we are meeting the intent of the credit by diverting construction and demolition debris from disposal in area landfills and in addition, we are significantly reducing environmental impact from transportation vehicle emissions and providing a non-profit organization with materials to provide site expansion.

Ruling:

While your strategy for handling excavated soil provides environmental benefit in reduced transportation of materials, it does not justify inclusion of excavated soil in MRc2. It is understood that many projects face challenges related to local market conditions for recycling. However, the weight of the soil would overwhelm the total amount of construction and demolition waste and enable credit achievement without addressing those impacts. As a result, the donated soil cannot be included in MRc2. You may want to consider evaluating the environmental benefits of the soil donation in the context of overall project emissions during construction and applying for an Innovation credit. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/28/2008
LEED Interpretation
Inquiry:

When removing petroleum contaminated soils there are two options for disposal. One would be to haul the contaminated soils to a hazardous materials landfill. The other option is to incinerate the soil to burn off the petroleum and remediate the soil into a environmentally safe product. In the case of Biomed project we elected to have the contaminated soils recycled (incinerated). During the site cleanup WT removed 787.4 TONS of contaminated soils from the project site. We are currently applying for the "Brownfield Credit" which all of this documentation will be sent to document the cleanup. Also LEED specifically says that land clearing waste (soils) cannot be included in the waste management plan, but for this case we feel that because of the soils were recycled from a hazardous material that we should be able to apply the tonnage to our waste management calculations. Can we use this toward this credit too?

Ruling:

Incinerating soil to remove contamination can not be considered recycling and apply to MRc2. It is not clear that incinerating contaminated soil is environmentally preferable to landfilling. Both hazardous waste and soil must be excluded from calculations for MRc2, and incineration is not an allowable diversion method, per the LEED-NC v2.2 Reference Guide. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
11/1/2011
LEED Interpretation
Inquiry:

The proposed project site is located on a military base that has potentially unexploded ordnance on-site.Protection from potential detonation during construction is required by the federal government to shield pedestrians and existing housing across the street from the project site. As a part of the project, a detonation barrier is to be constructed prior to start of excavation. This barrier can be built using various material but must have substantial foundations and structural strength to withstand large explosion forces. After construction is completed, the detonation barriers would be deconstructed to allow access to the site.The project team is proposing to incorporate salvaged local material into the design of these barrier walls. May the salvaged material qualify for MR credit 5 for regional material, MR credit 4 for recycled content?

Ruling:

The project team has inquired whether materials used for a temporary (during construction) detonation barrier can be included within the project material cost accounting since it is mandated to be built, particularly as it relates to recycled content, local material content, and construction waste management. No, the LEED Reference Guide for Green Building and Construction 2009 Edition Materials and Resources credits 3, 4, 5,and 6 "Include only materials permanently installed in the project" temporarily installed materials are considered equipment and cannot be included in MR Credits 3-6.

Campus Applicable
No
Internationally Applicable:
No
6/19/2008
LEED Interpretation
Inquiry:

Our major renovation project is a high-rise building in Germany. One of the recycling methods we apply is underground waste disposal, also called mine backfill (Bergversatz), a method which, in Germany, is governed by statutory provisions. Since with our project, a relatively large amount of material (gypsum waste, sheet glass, gypsum fiberboard panels, etc.) is disposed of in this manner, we would like to make sure that this way of recycling is acceptable in line with the Credit Intent. Underground waste disposal or mine backfill means that exploited deep mines are backfilled with liquid or solid mining or non-mining materials. Depending on their nature, the filling materials are stored in barrels or packed in big bags and their storage is controlled. The backfill may also consist of bulk material. Under the German Closed Substance Cycle and Waste Management Act (Kreislaufwirtschafts- und Abfallgesetz) and, in addition, under the German ordinance on the underground disposal of waste (Bergversatzverordnung) it is specified that if this disposal serves an economic purpose, e.g. if it prevents a mine from collapsing by filling it air-free, it is not considered as waste disposal but rather as waste recycling. Furthermore, for every 500 metric tons, analyses must be performed and submitted which confirm that the underground waste material is recognized as safe. As under the applicable German laws and regulations, underground waste disposal is recognized as recycling, we would like to know whether this recycling method complies with the requirements of the LEED Credit Intent and whether LEED also recognizes underground waste disposal as a means of recycling?

Ruling:

The applicant has requested acceptance of mine backfilling as an equivalent means of accomplishing construction waste management. Based on the description of the process, it does not appear that this practice will meet the intent of the credit. In addition to encouraging the diversion of debris from landfills, the credit intent includes an expectation that projects "redirect recyclable recovered resources back to the manufacturing process." While it is recognized that using clean waste material from construction rather than other potential materials to back fill deep mines may be environmentally preferable, this practice is not aligned with the intent of the credit. The waste is in essence going to a "landfill" and the specific materials noted (gypsum and glass) are known to be potential feed stocks for manufacturing processes. By using them as fill material, the proposed practice is burying potentially valuable raw materials. Underground waste disposal is not a recognized means of recycling for this credit. Applicable Internationally; Germany.

Campus Applicable
No
Internationally Applicable:
Yes
10/1/2013
LEED Interpretation
Inquiry:

For applicable MR credits, is it acceptable to use new or updated versions of CSI Master Format editions in lieu of versions referenced in reference guides or submittal requirements?

Ruling:

The applicant is requesting a ruling on whether or not the project Can use CSI Master Format 2010 Edition, Divisions: 03-10, 31 (Section 31.60.00 Foundations), and 32 (sections 32.10.00 Paving, 32.30.00 Site Improvements, and 32.90.00 Planting), in lieu of CSI Master Format 2004 Edition. Yes, it is acceptable to use new or updated versions of CSI Master Format editions in lieu of versions referenced in reference guides or submittal requirements. Ensure that the Master format divisions used correlate to the referenced the CSI Master Format version in the LEED reference guide for that rating system.

Campus Applicable
No
Internationally Applicable:
Yes
10/1/2012
LEED Interpretation
Inquiry:

We are performing a comparative analysis for fiberglass insulation regarding MR Credit 4: Recycled Content. Depending on the manufacturer, recycled content is reported either a plant- and product-specific average, or a country-wide average (various plants and products). We have contacted a manufacturer using North American average recycled content claims, and they state that the recycled content across their facilities and product lines can range from 0-70%. Are country-wide recycled content averages acceptable as documentation for MR Credit 4: Recycled Content? If country-wide averages are not acceptable, what level of specificity is acceptable?

Ruling:

***Update 1/1/13: The original ruling is no longer valid and has been superseded by the language below. The project team is requesting clarification regarding the documentation of recycled content for Materials and Resources Credit 4: Recycled Content. Recycled content claims must be specific to the installed product. The installed product refers to a unique product distinguished by color, type, and/or location of manufacture as identified to the consumer by SKU or other means. It is acceptable to use an average recycled content value stated by a single manufacturer for a single product. Recycled content claims for custom products are required to be product specific; industry wide or national averages are not acceptable for the purposes of LEED documentation. Note, for the purposes of LEED, steel has a previously established industry average of 25% post-consumer recycled content which does not require documentation on a per product basis. In all cases, if recycled content is given as a range then the lowest recycled-content percentage will be used for LEED documentation. Applicable Internationally.Original Ruling: The project team is inquiring about the acceptability of using a country wide average value for recycled content of a product. An average recycled-content claim, especially one that incorporates multiple product lines or places of manufacture, does not meet the credit intent and is not acceptable for LEED documentation. The product that is known to have zero recycled-content may be unduly benefiting from the recycled-content of other products/manufacturing facilities. Recycled-content claims must be specific to the installed product (and therefore place of manufacture), regional or national claims do not meet credit requirements. If product-specific recycled content is given as a range, then the lowest possible actual recycled-content number must be declared for LEED documentation. GBCI recognizes that this presents a challenge to design and construction teams as it is often not possible to specify or even identify-- the location of manufacture for a number of materials. It is hoped that manufacturers will respond to market demand for useful, credible product information. Note that this ruling does not apply to steel products, which have an established average recycled content of 25% and do not require documentation on a per product basis when that value is used in the LEED calculator. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
9/5/2008
LEED Interpretation
Inquiry:

The project team is seeking clarification for our intended use of on-site excavated rock. During excavation and site work at the project, a large amount of limestone rock was encountered. Instead of disposing of the rock off-site, we are using it on-site. We are breaking up the on-site rock into 12 - 18" pieces for use as rip-rap. This eliminates the need to use virgin quarry rock and reduces the amount of the volume of waste sent to the landfill. We would like to apply the market value of the rip-rap to MR credit 4.1, Recycled Content (pre-consumer). We will use the following formula for our calculations: # of Tons of excavated rock used on site * the local quarry price per ton * 1/2 = $ applied to MRc4.1 Since this approach will use what is typically a waste stream and use it to reduce the demand for off-site materials, it seems to meet the overall intent of the LEED process. If the rock cannot be applied to MRc4.1, is there any other credit that it could be applied to?

Ruling:

The project team is requesting clarification regarding on how to correctly account for rock extracted and used on site. It is good building practice to reuse materials on site and it is standard construction practice to reuse bedrock on the site (crushed or not). The reuse of these materials on site cannot be applied to MRc4 (Recycled Content), however, the value of the rip-rap may be applied to the calculations for MRc5 (Regional Materials), as calculated by the following equation: # of Tons of excavated rock used on site * the local quarry price per ton undelivered = $ applied to MRc5. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/29/2009
LEED Interpretation
Inquiry:

Methodology #1 Each co-mingled load of construction debris is weighted at the MRF and visually inspected then the percentage of each recyclable material is tallied. The recyclable materials are then processed for sale on the secondary market. The tallied data is documented in a running monthly report created by either the MRF or the Hauler and is submitted to the contractor for the project. Methodology #2 The MRF\'s self-reported recycling percentage rate (for the entire facility) is applied toward specific LEED projects\' delivered co-mingled tonnage brought to that facility. We are aware of the CIR ruling dated 12.2.05 stating that a project can use this methodology if a facility has government oversight over a facility\'s recycling rate calculations. In our case we have government oversight of the MRFs overall recovery rates but the reporting methodology required by the oversight agency doesn\'t account for C&D debris - asphalt, gypsum wallboard, and concrete tonnage which is processed through those facilities. LEED NC v2.2 accepts and credits concrete towards MRc2 but this disconnect between how the oversight agency tracks materials versus what is actually processed in a facility doesn\'t allow for accurate reporting and subsequent award of LEED credit in our local market. Please let us know if one or both methods are acceptable for tracking and documenting co-mingled boxes for MRc2.

Ruling:

This CIR asks if the USGBC can advise if one or both of two listed methods for documenting the recycled content of commingled waste are acceptable. In Methodology #1, if the facility is giving project specific recycling rates, they need to document actual percentage of material recycled based on actual weight or volume of material. Visual inspection is not an acceptable method. For "Methodology #2," the facility must be able to document that the "method of recording and calculating the recycling rate is regulated by a local or state government authority" in accordance with CIR dated 12/2/2005. If the facility\'s reported recycling rate is regulated by a local or state government, then it can be used toward achievement of the credit. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
11/3/2006
LEED Interpretation
Inquiry:

As stated in CIR ruling dated 8/29/2003, "Mechanical (mainly HVAC ductwork and equipment) and electrical system components (smaller infrastructure-type items such as wires, cables, junction boxes) are to be excluded from the LEED calculations. If a project team chooses to include additional items as part of the base material cost, such as elevators, appliances, hot tubs, or other semi-mechanical/electrical components, it should do so for all relevant material credits, which include MR Credits 3, 4, 5 and 6." Does this exclusion include thermal insulation for mechanical and plumbing systems, or is mechanical and plumbing insulation considered a "semi-mechanical component"? Furthermore, does this exclusion apply to self-insulated HVAC ducts, including fiber glass duct board ducts and flexible insulated ducts? Recycled content is currently available for these materials and excluding them would not provide incentive to manufacturers for increasing their use of recycled content, or motivate projects to incorporate recycled-content insulations. These products are lightweight and of low relative cost, and would not unduly affect other recycled content decisions.

Ruling:

Note that the referenced CIR is from NCv2.1, and your CIR was submitted for v2.2. Version 2.2 credit requirements state that mechanical, electrical and plumbing components shall not be included. The Reference Guide provides additional detail, although it does not clearly address your question. The phrase "Mechanical, electrical and plumbing components" refers to all items specified within CSI MasterFormat 1995 Divisions 15 and 16. Aside from the rationale stated in the Reference Guide (re: high-priced assemblies/equipment that would skew calculations), it is hoped that in general this approach provides a fairly level playing field between LEED projects and avoids a project\'s inquiries about recycled content in products for which data is difficult or impossible to gather, and where recycled content is not generally going to be influenced by LEED. Admittedly, this is a broad-brush solution that may miss some incentive opportunities, but the scope of materials for this and similar MR credits requires consideration of both technical and administrative issues for LEED. These credits were originally designed around Divisions 2 through 10: products considered the most practical to influence, the most practical upon which to create credit calculations, and which represent the bulk of a building\'s mass. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/17/2002
LEED Interpretation
Inquiry:

This project has contracted with the construction waste hauling company Richard S. Burns and Company, Inc. (here after known as RSBCO) who will take all construction waste from our project and recycle about 90% of it through a patented process that produce several products. These recycled construction waste products are unconventional and one of the products is sold for use in landfill operations. We would like the USGBC to confirm that these products made from construction waste meet the intent of the MR Credit 2 - the diversion of construction waste into the commercial products stream - thereby qualifying our project for MR credits 2.1 and 2.2. RSBCO has developed and patented a specific process of receiving, sorting, grinding, and blending construction waste materials to recover recyclable materials and produce desired products from the rest of the waste. The process begins with screening out fine particles for later use. The material then moves through a positive sorting process where individually recyclable materials like ferrous and non-ferrous metals, cardboard, masonry, and wood are recovered. RSBCO sells ferrous and non-ferrous metals and cardboard to secondary processing markets. On-site, RSBCO processes masonry and wood into a clean fill product used around pipes, in drainage trenches, or as substrate for road construction. We think the recovered recyclable materials and the clean fill product both clearly meet the intent of the MR credit 2.The process continues with negatively sorting the remaining construction material to remove undesirable materials such as plastic trash bags and clothing. This undesirable material represents less than 10% of total materials received and is continuously scrutinized for further recycling opportunities. The remaining material is then ground, screened again for metal recovery, and sized. The ground and crushed aggregate from all stages of the process are then blended in specific proportion to create a product called Barrier

Ruling:

This approach seems to meet the intent of MR Credits 2.1 and 2.2. Keep track of recycling rates according to credit requirements. The only clarification necessary is whether the Barrier product described is in fact used as a cover material with value to the landfill. Because the credit language requires the project to demonstrate recycling, salvage, and landfill rates, you will need to provide some documentation that the Barrier product is USED BY the landfill as described, and not just DISCARDED AT the landfill.

Campus Applicable
No
Internationally Applicable:
No
5/9/2011
LEED Interpretation
Inquiry:

Is lead-based paint containing material considered hazardous for the purposes of LEED and therefore eligible for exclusion from the calculations of waste diversion?

Ruling:

Yes, teams may exclude lead-based paint contaminated drywall from your construction waste management calculations. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/1/2013
LEED Interpretation
Inquiry:

Is a campus-like approach for MRc2 acceptable for two LEED-NC v2009 registered projects each pursuing one-off certification? Space is limited on the urban site for recycling dumpsters, therefore the best approach for CWM may mean that waste and recycling for all LEED registered projects will need to be aggregated and tracked together. AGMBC Master Site / Campus is not utilized, yet we propose using the AGMBC precedent for MRc2 documentation. We propose to track together all demolition, construction waste/diverted, & land clearing material for the project and then apply a weighted average based on GSF to each LEED project.

Ruling:

The applicant has requested to use a weighted average approach for Materials and Resources Credit 2 Construction Waste Management for several buildings that are pursuing one-off LEED Certification under LEED BD&C. Yes, the project may utilize a weighted approach based on gross floor area to determine the total construction waste for each building pursuing certification. For each LEED BD&C Building, the project team will be required to identify the materials that are diverted from disposal and provide calculations documenting the diversion rate. Each building must meet the required threshold for waste diversion in order to earn the credit. In addition, the Construction Waste Management (CWM) Plan must outline goals for diversion for each building, not just as an aggregate across all projects. Note that if the waste is comingled and sorted offsite, the project may follow the requirements outlined in LEED Interpretation 3000 for determining and documenting the diversion rate. This ruling addresses only projects pursing LEED Certification under the BD&C Rating Systems and does not set any precedent or guidelines for projects pursuing certification under different LEED Rating Systems. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/14/2007
LEED Interpretation
Inquiry:

Our project is located on a Washington State DSHS-JRA Juvenile Rehabilitation Administration (Detention) Campus in Chehalis called Green Hill School. The project consists of two new commercial buildings replacing two obsolete buildings (demolished in this project). Both new buildings, Heath Center/Administration (HCA) and Intensive Management Unit (IMU), will be placed on the same site area (building footprint) as one of the obsolete buildings (Building \'X\'). Each new building footprint covers approximately 1/2 the existing footprint of the obsolete Building \'X\'. After the demolition of the 2nd obsolete building (Building \'W\'), this area and other disturbed areas will be restored with native/adaptive landscaping to create a green space. Only the HCA building will be pursuing USGBC recorded status of LEED Silver. The HCA building consists of a Health Center including medical, dental, and mental health services on the first floor and Administration offices on the second floor. This project will be completed in 3 phases, two bid packages and two separate Contractors. We are proposing one consistent LEED boundary that we will use for all the LEED credit. The entire project will have 3 different construction and TESC boundaries that will be different from the LEED boundary due to the phasing of demolition and construction and the inclusion of the IMU bldg (which is not pursuing LEED) in the construction boundary. Bid Pack #1 - Site Utilities and Demolition of Building \'X\' summer \'07 Bid Pack #2 - Phase I - New Construction of HCA & IMU building (in footprint of demolished bldg \'X\') spring to winter \'08 Phase II - Demolition of Bldg \'W\' and restoration of native/adaptive landscaping winter \'08/spring \'09 We could include 1/2 of Bldg \'X\' within our LEED boundary OR exclude Building \'X\' demolition from the LEED scope of work. We are planning to divert this demolition waste from the landfill, but the paperwork may be confusing with only 1/2 the building counting towards our LEED credits and the paper work from demolition of Building \'X\' will be from a different Contractor. Bldg \'W\' will be included in the LEED boundary and is in the same Bid Pack #2 that includes the new construction, although this demolition and restoration of landscape will be Phase II. Prior to demolition, a full hazardous material abatement would be completed to abate asbestos, mercury, and lead based paints. Demolition of building \'X\' and \'W\' would mostly consist of grinding up concrete into a rocky base coarse which would be used as base material along the perimeter road of the secured campus. Temporary stockpiling of soils from demolition of Building \'X\' and preparation of the site will be used to fill-in area of demolition of Building \'W\'. We propose that the LEED boundary for our HCA building would include half of the footprint of the demolished Building \'X" and the entire footprint of the demolished building \'W\' (excluding the other new building - IMU building which in located over the other 1/2 of Building \'X\'). The inquiry is: Is our proposal for our LEED boundary acceptable? Based on the LEED site boundary described above, is it permissible to have 3 different phased TESC boundaries and Construction boundaries beyond the one consistent LEED boundary for the HCA building? Is it permissible to calculate only the portion of the demolition of Bldg \'X\' which is in the LEED boundary toward MRc2 with the paper work being provided from a different contractor?

Ruling:

The applicant is asking whether their proposed LEED boundary and allocation of demolition debris is acceptable. The proposed LEED boundary is acceptable as long is it is used consistently across all LEED credits. The allocation of only the portion of demolished Building "X" within the LEED boundary is also consistent with credit requirements. The allocation of the entire demolition of Building "W" is acceptable, as long as this is within the scope of the project seeking LEED certification. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
1/16/2007
LEED Interpretation
Inquiry:

Due to late incorporation of construction waste recycling during the construction process, meeting the minimum recycled waste threshold of 50% would not be feasible even if all waste was recycled from now until project completion. This situation accounts solely for the core and shell portion of the structure as this is the portion of the project included in the scope of LEED-CS certification. The project team is interested in providing recycling containers for what remains of core and shell construction, as well as for the tenants during their fit out construction, which has not yet begun. Is there an opportunity for the project to obtain the MRc2.1 point if they can demonstrate that 50% of the remaining core and shell construction waste as well as tenant fit out construction waste is recycled? If this proposed compliance path diverges too far from the original credit structure, would it be possible to merit an ID point for this effort?

Ruling:

If 50% waste diversion cannot be documented for the whole core and shell construction, this credit cannot be earned. In addition, as tenant fit-out is not part of the scope of core and shell, this waste diversion cannot count under LEED-CS. Innovation and design points are awarded for exemplary performance of MRc2, for which the threshold is 95% diversion. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
5/9/2011
LEED Interpretation
Inquiry:

In the waste diversion process many questions have come up regarding utilizing Waste-to-Energy as a landfill diverstion strategy. Can Waste-to-Energy be utilized as a landfill diversion strategy if; this effort ran parallel to sorting recyclable and reusable materials, and the power plant proposed has approved EPA pollution control devices. Alternatively, can paying additional cost to transport non recyclable trash to a Waste-to Energy power plant to be incinerated and converted into electrical energy count as diverted waste?

Ruling:

Only wood derived fuel can contribute to MRc2 in this manner. Incineration cannot be used as an alternative method for diverting waste from the landfill for purposes of credit achievement. Applicable internationally.

Campus Applicable
No
Internationally Applicable:
Yes
3/10/2008
LEED Interpretation
Inquiry:

Intent: "Increase demand for building products that incorporate recycled content materials, thereby reducing impacts resulting from extraction and processing of virgin materials." The project targeting LEED-CS certification is located in Ontario, Canada. The LEED-CS Reference Guide requires that "SCMs as a percentage of total cementitious materials" and the "Dollar value of all cementitious materials" are provided by the manufacturer. The Redimix Concrete Association of Ontario states that concrete mixes are confidential, and as such will not divest the "Dollar value of all cementitious materials" as required by the LEED-CS Reference Guide. (For LEED Canada-NC projects, it is standard practice in Ontario for concrete suppliers to provide the overall recycled content of concrete in a signed letter.) To accommodate this situation, we propose the following documentation approach to the LEED-CS version of the SCM calculation. Following these steps will mathematically yield the same result as the procedure outlined in the LEED-CS Reference Guide: 1) The supplier determines the recycled content value due to SCMs for the entire project by multiplying the "SCMs as a percentage of total cementitious materials" and the "Dollar value of all cementitious materials". 2) The supplier provides a signed letter indicating the recycled content value due to SCMs for the entire project. 3) When completing the letter template, instead of providing the value of all cementitious materials and the recycled content, we provide the recycled content value due to SCMs, and indicate that the recycled content is 100% (pre-consumer). Please confirm if this approach is acceptable.

Ruling:

The project team has requested an alternative compliance path for determining the value of Supplementary Cementitious Materials (SCM) due to confidentiality issues. If SCMs are used as part of the percentage recycled content, a letter signed by the concrete supplier/manufacturer or professional engineer must be submitted that certifies the reduction in Portland cement from BASE MIX to ACTUAL SCM MIX (as a percentage of weight). This can be provided as a total reduction in Portland cement for all the concrete used on the project. Applicable Internationally.

Campus Applicable
No
Internationally Applicable:
Yes
6/8/2009
LEED Interpretation
Inquiry:

During construction while excavating for placement of compacted sub-grade and asphalt, limestone was found on our project site. Due to its location and interference with the parking surface elevation, the rock was removed and donated to the local county which was used for permanent erosion control on a different project site. Although the reference guide disregards excavated soil and land clearing debris from this credit, we propose that the limestone as a product differs from the "land clearing debris" because it is a material which can be recycled into another product that otherwise would have had to been extracted and manufactured. We believe that this attribute of the limestone allows it to count as a "reusable material". We also believe that the donation and redirection of the limestone as a reusable material for a different site, not only meets the intent of this credit by diverting waste, but is also an acceptable manner (as defined by the reference guide) by which to qualify for the credit as it is "redirecting reusable materials to appropriate sites". In keeping with the intent of this credit, can we include this rock in our MRc2 Construction Waste Management Calculations?

Ruling:

**Update October 1, 2013: This ruling is no longer valid. Please see LI 10062 for more information and an update ruling.
The project is proposing to include excavated limestone as diverted construction waste because it was given to another project to be used as permanent erosion control on another project. The LEED Reference Guide explicitly defines rock as land clearing debris and thus it can not be included in credit calculations. Previous CIR rulings dated 9/9/2008 and 3/4/2004 state the same conclusion.

Campus Applicable
No
Internationally Applicable:
Yes
11/1/2011
LEED Interpretation
Inquiry:

The proposed project site is located on a military base that has potentially unexploded ordnance on-site.Protection from potential detonation during construction is required by the federal government to shield pedestrians and existing housing across the street from the project site. As a part of the project, a detonation barrier is to be constructed prior to start of excavation. This barrier can be built using various material but must have substantial foundations and structural strength to withstand large explosion forces. After construction is completed, the detonation barriers would be deconstructed to allow access to the site.The project team is proposing to incorporate salvaged local material into the design of these barrier walls. May the salvaged material qualify for MR credit 2 Construction Waste Managementif recycled after deconstruction?

Ruling:

The project team has inquired whether materials used for a temporary (during construction) detonation barrier can be included within the construction waste management materials diverted since it is mandated to be built. If the temporary detonation barrier is recycled or salvaged after deconstruction, it meets the intent of MR Credit 2 (diversion from landfill and incineration) and may contribute towards construction waste management.

Campus Applicable
No
Internationally Applicable:
No

LEEDuser expert

Jon Clifford

GREENSQUARE
LEED-AP BD+C

See all LEEDuser forum discussions about this credit » Unsubscribe from discussions about CS-2009 MRc4