Log in
LEED v4
Homes Mid-Rise
Sustainable Sites
Rainwater management

LEED CREDIT

Mid-Rise-v4 SSc2: Rainwater management 1-3 points

LEEDuser’s viewpoint

Explore this LEED credit

Post your questions on this credit in the forum, and click on the credit language tab to review to the LEED requirements.

Credit language

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Intent

To reduce rainwater runoff volume from the site.

Requirements

Projects that must comply with local requirements of the National Pollutant Discharge Elimination System (NPDES) must follow Case 2.

Case 1. Low impact development

Use low-impact development (LID) techniques to minimize the amount of stormwater that leaves the site. Examples of acceptable techniques include the following:

  • planting areas with native or adapted plant material (e.g. trees shrubs);
  • installing a vegetated roof;
  • using permeable paving, consisting of porous above-ground materials (e.g., open pavers, engineered products), a base layer designed to drain water away from the home, and (often) a 6-inch-deep (150 millimeters) subbase; and
  • installing permanent infiltration or collection features (e.g., vegetated swale, rain garden, rainwater cistern) that can handle 100% of the runoff from a two-year, 24-hour storm.

Single-family home projects may use Table 1 or Table 2 to determine points; multifamily projects must use Table 1.

To determine compliance for single-family and multifamily homes, calculate the percentage of the lot area, including the area under roof, that is permeable or can direct water to an on-site catchment or infiltration feature.

Table 1. Points for permeable area, as percentage of total lot area

Percentage Points
50–64% 1
65–79% 2
≥80% 3

As an alternative approach to determining compliance for single-family homes only, credit is given for reducing the total impermeable area compared to the ENERGY STAR reference home, as listed in Table 2.

Table 2. Conditioned floor area of reference home, by number of bedrooms

  1 2 3 4 5 6 7 8 or more
Floor area (square feet) 1,000 1,600 2,200 2,800 3,400 4,000 4,600 + 600 ft2 per additional bedroom
Floor area (square meters) 93 148 204 260 315 371 426 + 55.6 square meters per additional bedrooms

Thresholds for total impermeable area are then calculated according to the values in Table 3, column 1.

Table 3. Points for reducing total impermeable area

Impermeable area (square feet) Points
Reference home size * 1 1
Reference home size * 0.66 2
Reference home size * 0.33 3
Case 2. National Pollutant Discharge Elimination System (NPDES) projects

Using low-impact development and green infrastructure to replicate natural site hydrology, manage on-site the runoff from the developed site for the percentile regional or local rainfall events listed in Table 4.

Use daily rainfall data and the methodology in the U.S. Environmental Protection Agency’s Technical Guidance on Implementing the Stormwater Runoff Requirements for Federal Projects, under Section 438 of the Energy Independence and Security Act, to determine the percentile amount.

Table 4. Points for on-site management of water from rainfall events

Percentile rainfall event Points
95th 2
98th 3
See all forum discussions about this credit »

What does it cost?

Cost estimates for this credit

On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.

Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.

This information is also available in a full PDF download in The Cost of LEED v4 report.

Learn more about The Cost of LEED v4 »

Addenda

10/5/2018Updated: 10/5/2018
Reference Guide Correction
Description of change:
Remove the following sentence:

“Where this is not possible or practical, retaining, treating, and then gradually releasing rainwater are acceptable.”
Campus Applicable
No
Internationally Applicable:
No
See all forum discussions about this credit »

Documentation toolkit

The motherlode of cheat sheets

LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Intent

To reduce rainwater runoff volume from the site.

Requirements

Projects that must comply with local requirements of the National Pollutant Discharge Elimination System (NPDES) must follow Case 2.

Case 1. Low impact development

Use low-impact development (LID) techniques to minimize the amount of stormwater that leaves the site. Examples of acceptable techniques include the following:

  • planting areas with native or adapted plant material (e.g. trees shrubs);
  • installing a vegetated roof;
  • using permeable paving, consisting of porous above-ground materials (e.g., open pavers, engineered products), a base layer designed to drain water away from the home, and (often) a 6-inch-deep (150 millimeters) subbase; and
  • installing permanent infiltration or collection features (e.g., vegetated swale, rain garden, rainwater cistern) that can handle 100% of the runoff from a two-year, 24-hour storm.

Single-family home projects may use Table 1 or Table 2 to determine points; multifamily projects must use Table 1.

To determine compliance for single-family and multifamily homes, calculate the percentage of the lot area, including the area under roof, that is permeable or can direct water to an on-site catchment or infiltration feature.

Table 1. Points for permeable area, as percentage of total lot area

Percentage Points
50–64% 1
65–79% 2
≥80% 3

As an alternative approach to determining compliance for single-family homes only, credit is given for reducing the total impermeable area compared to the ENERGY STAR reference home, as listed in Table 2.

Table 2. Conditioned floor area of reference home, by number of bedrooms

  1 2 3 4 5 6 7 8 or more
Floor area (square feet) 1,000 1,600 2,200 2,800 3,400 4,000 4,600 + 600 ft2 per additional bedroom
Floor area (square meters) 93 148 204 260 315 371 426 + 55.6 square meters per additional bedrooms

Thresholds for total impermeable area are then calculated according to the values in Table 3, column 1.

Table 3. Points for reducing total impermeable area

Impermeable area (square feet) Points
Reference home size * 1 1
Reference home size * 0.66 2
Reference home size * 0.33 3
Case 2. National Pollutant Discharge Elimination System (NPDES) projects

Using low-impact development and green infrastructure to replicate natural site hydrology, manage on-site the runoff from the developed site for the percentile regional or local rainfall events listed in Table 4.

Use daily rainfall data and the methodology in the U.S. Environmental Protection Agency’s Technical Guidance on Implementing the Stormwater Runoff Requirements for Federal Projects, under Section 438 of the Energy Independence and Security Act, to determine the percentile amount.

Table 4. Points for on-site management of water from rainfall events

Percentile rainfall event Points
95th 2
98th 3
See all LEEDuser forum discussions about this credit » Subscribe to new discussions about Mid-Rise-v4 SSc2