Log in
LEED v4
Neighborhood Development
Green infrastructure & buildings
Minimized site disturbance

LEED CREDIT

ND-v4 GIBc7: Minimized site disturbance 1 point

LEEDuser’s viewpoint

Explore this LEED credit

Post your questions on this credit in the forum, and click on the credit language tab to review to the LEED requirements.

Credit language

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Option 1. Development footprint on previously developed land (1 point)
Locate 100% of the development footprint and the construction impact zone on previously developed land.
Option 2. Undeveloped portion of project left undisturbed (1 point)
Depending on the density of the project, do not develop or disturb a portion of the site that has not been previously developed, exclusive of (1) any land preserved by codified law, (2) a prerequisite of LEED for Neighborhood Development or (3) exempt areas designated as nonbuildable in comprehensive land-use plans. Stipulate in covenants, conditions, and restrictions (CC&R) or other binding documents that the undisturbed area will be protected from development by a private or governmental agency for the purpose of long-term conservation. When determining the minimum area to be left undeveloped, mixed-use projects must use the lowest applicable density from Table 1 or use the weighted average methodology in NPD Credit Compact Development. Densities and minimum percentages are as follows:
Table 1. Minimum undeveloped area, by project density

Residential density (DU/acre)

Residential density
(DU/hectare)

Nonresidential density (FAR)

Minimum area left undisturbed

20%

> 13 and ≤ 18

> 32 and ≤ 45

≥ 0.5 and ≤1

15%

> 18

> 45

> 1

10%

DU = dwelling unit; FAR = floor-area ratio For portions of the site that are not previously developed, identify construction impact zones that limit disturbance to the following:
  • 40 feet (12 meters) beyond the building perimeter;
  • 10 feet (3 meters) beyond surface walkways, patios, surface parking, and utilities less than 12 inches (30 centimeters) in diameter;
  • 15 feet (4.5 meters) beyond street curbs and main utility branch trenches; and
  • 25 feet (7.5 meters) beyond constructed areas with permeable surfaces (such as pervious paving areas, stormwater retention facilities, and playing fields) that require additional staging areas to limit compaction in the constructed zone.
For all projects
Survey the site to identify the following:
  • trees in good or excellent condition, as determined by an arborist certified by the International Society of Arboriculture (ISA) or local equivalent professional for projects outside the U.S.;
  • any heritage or champion trees of special importance to the community because of their age, size, type, historical association, or horticultural value, as defined by a government forester;
  • all trees larger than 6 inches (15 centimeters) in diameter at breast height (dbh, 4 feet 6 inches [1.4 meters] above ground); and
  • any invasive plant species that affect trees present on the site, and whether those plants threaten the health of other trees to be preserved on the site, as determined by an ISA-certified arborist or local equivalent professional.
Preserve the following trees that are also identified as in good or excellent condition:
  • all heritage or champion trees and trees whose dbh exceeds 50% of the state champion dbh for the species;
  • a minimum of 75% of all noninvasive trees (including the above) larger than 18 inches (45 centimeters) dbh; and
  • a minimum of 25% of all noninvasive trees (including the above) larger than 12 inches (30 centimeters) dbh if deciduous and 6 inches (15 centimeters) dbh if coniferous.
Tree condition ratings must be determined by an ISA-certified arborist using ISA-approved assessment measures or by a local equivalent professional utilizing an equivalent methodology. Develop a plan, in consultation with and approved by an ISA-certified arborist or equivalent, for the health of the trees, including fertilization and pruning, and for their protection during construction. If an ISA-certified arborist or local equivalent professional has determined that any trees to be preserved are threatened by invasive vegetation, develop a plan to reduce the invasive vegetation. Stipulate in codes, covenants, and restrictions or other binding documents that the undisturbed area of the preserved trees will be protected from development by a private or governmental agency for the purpose of long-term conservation. See all forum discussions about this credit »

What does it cost?

Cost estimates for this credit

On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.

Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.

This information is also available in a full PDF download in The Cost of LEED v4 report.

Learn more about The Cost of LEED v4 »

Documentation toolkit

The motherlode of cheat sheets

LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Option 1. Development footprint on previously developed land (1 point)
Locate 100% of the development footprint and the construction impact zone on previously developed land.
Option 2. Undeveloped portion of project left undisturbed (1 point)
Depending on the density of the project, do not develop or disturb a portion of the site that has not been previously developed, exclusive of (1) any land preserved by codified law, (2) a prerequisite of LEED for Neighborhood Development or (3) exempt areas designated as nonbuildable in comprehensive land-use plans. Stipulate in covenants, conditions, and restrictions (CC&R) or other binding documents that the undisturbed area will be protected from development by a private or governmental agency for the purpose of long-term conservation. When determining the minimum area to be left undeveloped, mixed-use projects must use the lowest applicable density from Table 1 or use the weighted average methodology in NPD Credit Compact Development. Densities and minimum percentages are as follows:
Table 1. Minimum undeveloped area, by project density

Residential density (DU/acre)

Residential density
(DU/hectare)

Nonresidential density (FAR)

Minimum area left undisturbed

20%

> 13 and ≤ 18

> 32 and ≤ 45

≥ 0.5 and ≤1

15%

> 18

> 45

> 1

10%

DU = dwelling unit; FAR = floor-area ratio For portions of the site that are not previously developed, identify construction impact zones that limit disturbance to the following:
  • 40 feet (12 meters) beyond the building perimeter;
  • 10 feet (3 meters) beyond surface walkways, patios, surface parking, and utilities less than 12 inches (30 centimeters) in diameter;
  • 15 feet (4.5 meters) beyond street curbs and main utility branch trenches; and
  • 25 feet (7.5 meters) beyond constructed areas with permeable surfaces (such as pervious paving areas, stormwater retention facilities, and playing fields) that require additional staging areas to limit compaction in the constructed zone.
For all projects
Survey the site to identify the following:
  • trees in good or excellent condition, as determined by an arborist certified by the International Society of Arboriculture (ISA) or local equivalent professional for projects outside the U.S.;
  • any heritage or champion trees of special importance to the community because of their age, size, type, historical association, or horticultural value, as defined by a government forester;
  • all trees larger than 6 inches (15 centimeters) in diameter at breast height (dbh, 4 feet 6 inches [1.4 meters] above ground); and
  • any invasive plant species that affect trees present on the site, and whether those plants threaten the health of other trees to be preserved on the site, as determined by an ISA-certified arborist or local equivalent professional.
Preserve the following trees that are also identified as in good or excellent condition:
  • all heritage or champion trees and trees whose dbh exceeds 50% of the state champion dbh for the species;
  • a minimum of 75% of all noninvasive trees (including the above) larger than 18 inches (45 centimeters) dbh; and
  • a minimum of 25% of all noninvasive trees (including the above) larger than 12 inches (30 centimeters) dbh if deciduous and 6 inches (15 centimeters) dbh if coniferous.
Tree condition ratings must be determined by an ISA-certified arborist using ISA-approved assessment measures or by a local equivalent professional utilizing an equivalent methodology. Develop a plan, in consultation with and approved by an ISA-certified arborist or equivalent, for the health of the trees, including fertilization and pruning, and for their protection during construction. If an ISA-certified arborist or local equivalent professional has determined that any trees to be preserved are threatened by invasive vegetation, develop a plan to reduce the invasive vegetation. Stipulate in codes, covenants, and restrictions or other binding documents that the undisturbed area of the preserved trees will be protected from development by a private or governmental agency for the purpose of long-term conservation.
See all LEEDuser forum discussions about this credit » Subscribe to new discussions about ND-v4 GIBc7