Log in
LEED v2008
Homes
Energy and Atmosphere
Insulation

LEED CREDIT

Homes-v2008 EAc2: Insulation 2 points

LEEDuser’s viewpoint

Explore this LEED credit

Post your questions on this credit in the forum, and click on the credit language tab to review to the LEED requirements.

Credit language

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Prerequisites

2.1 Basic insulation. Meet all the following requirements:
  1. Install insulation that meets or exceeds the R-value requirements listed in Chapter 4 of the 2004 International Energy Conservation Code. Alternative wall and insulation systems, such as structural insulated panels (SIPs) and insulated concrete forms (ICFs), must demonstrate a comparable Rvalue, but thermal mass or infiltration effects cannot be included in the R-value calculation.
  2. Install insulation to meet the Grade II specifications set by the National Home Energy Rating Standards (Table 1). Installation must be verified by an qualified qualified energy rater or Verification Team conducting a predrywall thermal bypass inspection, as summarized in Figure 1.
Note: For any portion of the home constructed with SIPs or ICFs, the rater must conduct a modified visual inspection using the ENERGY STAR Structural Insulated Panel Visual Inspection Form.

Credits

2.2 Enhanced insulation (2 points). Meet the following requirements:
  1. Install insulation that exceeds the R-value requirements listed in Chapter 4 of the 2004 International Energy Conservation Code by at least 5%. Alternative wall and insulation systems, such as structural insulated panels (SIPs) and insulated concrete forms (ICFs), must demonstrate a comparable R-value, but thermal mass or infiltration effects cannot be included in the R-value calculation.
  2. Install insulation to meet the Grade I specifications set by the National Home Energy Rating Standards (Table 1). Installation must be verified by an qualified energy rater or Verification Team conducting a predrywall thermal bypass inspection as summarized in Figure 1.
Note: For any portion of the home constructed with SIPs or ICFs, the rater must conduct a modified visual inspection, using the ENERGY STAR Structural Insulated Panel Visual Inspection Form.
Table 1 Summary of HERS Installation Guides

Grade

Description

I

Meet the requirements of Grade II (below), but allow only very small gaps, and compression or incomplete fill amounts to 2% or less.

II

Moderate to frequent installation defects, gaps around wiring, electric outlets, etc. and incomplete fill amounts to 10% of less. Gaps running clear through the insulation amount to no more than 2% of the total surface area covered by the insulation. Wall insulation is enclosed on all six sides and in substantial contact with the sheathing material on at least one side (interior or exterior) of the cavity.

Figure 1 ENERGY STAR Thermal Bypass Inspection Checklist
[view:embed_resource=page_1=2723861] See all forum discussions about this credit »

What does it cost?

Cost estimates for this credit

On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.

Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.

This information is also available in a full PDF download in The Cost of LEED v4 report.

Learn more about The Cost of LEED v4 »

Documentation toolkit

The motherlode of cheat sheets

LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Prerequisites

2.1 Basic insulation. Meet all the following requirements:
  1. Install insulation that meets or exceeds the R-value requirements listed in Chapter 4 of the 2004 International Energy Conservation Code. Alternative wall and insulation systems, such as structural insulated panels (SIPs) and insulated concrete forms (ICFs), must demonstrate a comparable Rvalue, but thermal mass or infiltration effects cannot be included in the R-value calculation.
  2. Install insulation to meet the Grade II specifications set by the National Home Energy Rating Standards (Table 1). Installation must be verified by an qualified qualified energy rater or Verification Team conducting a predrywall thermal bypass inspection, as summarized in Figure 1.
Note: For any portion of the home constructed with SIPs or ICFs, the rater must conduct a modified visual inspection using the ENERGY STAR Structural Insulated Panel Visual Inspection Form.

Credits

2.2 Enhanced insulation (2 points). Meet the following requirements:
  1. Install insulation that exceeds the R-value requirements listed in Chapter 4 of the 2004 International Energy Conservation Code by at least 5%. Alternative wall and insulation systems, such as structural insulated panels (SIPs) and insulated concrete forms (ICFs), must demonstrate a comparable R-value, but thermal mass or infiltration effects cannot be included in the R-value calculation.
  2. Install insulation to meet the Grade I specifications set by the National Home Energy Rating Standards (Table 1). Installation must be verified by an qualified energy rater or Verification Team conducting a predrywall thermal bypass inspection as summarized in Figure 1.
Note: For any portion of the home constructed with SIPs or ICFs, the rater must conduct a modified visual inspection, using the ENERGY STAR Structural Insulated Panel Visual Inspection Form.
Table 1 Summary of HERS Installation Guides

Grade

Description

I

Meet the requirements of Grade II (below), but allow only very small gaps, and compression or incomplete fill amounts to 2% or less.

II

Moderate to frequent installation defects, gaps around wiring, electric outlets, etc. and incomplete fill amounts to 10% of less. Gaps running clear through the insulation amount to no more than 2% of the total surface area covered by the insulation. Wall insulation is enclosed on all six sides and in substantial contact with the sheathing material on at least one side (interior or exterior) of the cavity.

Figure 1 ENERGY STAR Thermal Bypass Inspection Checklist
[view:embed_resource=page_1=2723861]
See all LEEDuser forum discussions about this credit » Subscribe to new discussions about Homes-v2008 EAc2