Option 4: Since this option was added in April 2010, after the LEED Online credit form was finalized, it is not currently mentioned on the form. Document this option using the alternative compliance path instead of one of the standard paths.
Product cut sheets are not required to be included in your LEED review but it is best to keep these until the project is certified, just in case this credit gets audited.
It is usually a good idea to do a “mini air flush” (if your project is not attempting EQc3.2) before occupancy to help remove any lingering VOCs from the construction process. This can be as simple as putting industrial sized fans in the window and pumping in fresh air overnight or running the HVAC exhaust on high for a few days. (See EQc3.2: Construction Indoor Air Quality Plan—Before Occupancy if the team wants to do a full flush-out for an additional LEED point.)
Schedule the installation of carpet systems so that they are protected from construction air contaminants. This is required if your project is pursuing EQc3.1: Construction Indoor Air Quality Management Plan—During Construction. For example, carpet tiles installed before walls are painted will absorb VOCs from the paint, and then off-gas over a longer period.
The GC should be aware of any warranty issues that may exist if alternative adhesives are used. For example, a carpet company’s warranty may insist that a specific carpet adhesive that doesn’t meet the credit requirements.
