NC2.2 EQc6.1 & EQc6.2 - Do the shared multi-occupant spaces need to match between credits?
Does anyone have experince where mechanical and electrical interpret the shared multi-occupant spacesConference rooms, classrooms and other indoor spaces used as a place of congregation for presentations, trainings, etc. Individuals using these spaces share the lighting and temperature controls and they should have, at a minimum, a separate zone with accessible thermostat and an air-flow control. Group multi-occupant spaces do not include open office plans that contain individual workstations. differently so they don't match between the credits? Will we get kicked out for this one?
1 Comments
NC2.2 EQc6.1 & EQc6.2 - Do the shared multi-occupant spaces need
It would be best to come up with a consensus on the matter. If you don’t you are setting yourself up for further questions by the reviewer…it is best to avoid that! If for some reason, you can’t come up with an agreed upon breakdown of multi-occupant spacesConference rooms, classrooms and other indoor spaces used as a place of congregation for presentations, trainings, etc. Individuals using these spaces share the lighting and temperature controls and they should have, at a minimum, a separate zone with accessible thermostat and an air-flow control. Group multi-occupant spaces do not include open office plans that contain individual workstations. you should at least write a narrative explaining the difference. Good luck!
Start a new LEED comment thread